How did the case look that was just filled? I've had some of the powder through expanders that would catch on the lip of a case and then "pop" as the expander slid off the lip of the case. 90% of the time when this would happen it would bend one side of the case rim over on itself. My .32 S&W...
I'd like to upgrade my powder measure. Currently I'm using a Lee Auto-drum on an older Pro 1000. Does anyone have experience with both of these measures and can make a recommendation on one over the other, or are they so similar that it comes down to which color is your preference? They are...
Nice, I have printed some reloading/gun related stuff, but I'm thoroughly convinced that 75% of things that are printed, are things for the 3D printer you have!
I read an article that stated that the live rounds may have been handloads that were mixed in with some ammo that was given to the armorer and that's how they ended up on the set. ***? I would think that knowing if you have live ammo on the set would be a primary job of the armorer.
I...
Not sure what the gaskets are made of, but petroleum jelly can dissolve rubber and neoprene. If you have access to a 3D printer you can print a "wrench" that will give you more leverage. https://www.thingiverse.com/thing:4908772
He was most likely shooting uncoated lead rounds in his revolver and most of the smoke was from the lube. I enjoy shooting lead indoors, as long as the ventilation system is working well. Puts out a nice cloud but disperses pretty quickly in the range I frequent.
I couldn't pass up the sale Midway was having and my APP arrived earlier in the week. This thing is awesome! It will be my dedicated depriming rig, and I also purchased the swaging kit, but that won't get used much. I run a Pro 1000 so I already had the Lee case feeding system. I mounted it...
It looks like the new ones have the slot on the side. I have the older one with it on the front.
I had one of my shell holders that lost some metal around the rim and allowed the case to rock to that side when trying to prime. I contacted FA and they sent me an entire new unit instead of...
Upper in question was a BCA 10.5". As far as mixing up powder, I always keep only one on the bench at a time. As far as how many rounds were through the paper, I didn't think to look. I'll keep that in mind if this ever happens again (I hope it doesn't). It definitely wasn't a slam fire. Out...
I did use magnum primers. H110 is the only powder I've used for 300 B.O. I do visually check for powder before I set a bullet in place, but maybe I screwed up this time. I checked all of the rounds in a Lyman case gage after loading. Maybe I had bullet setback in this round, but I did finish...
Some of it I purchased online already cut down, processed and annealed, some I cut down from my supply of .223/5.56 and formed myself. In other words, no. That was the first loading by me, but it wasn't new brass. I'm going to pull the rest of those loads and give the brass a really good...
Was shooting a new load Tuesday in my 300 B.O. AR 15 pistol. Berry's 220 grain spire point over 9.5 grains of H110, COL of 2.20. When I finished my first mag, I noticed that the bolt didn't hold open, but it didn't sound any different. I was at an indoor range and the guy next to me was...
I personally don't have a problem with background checks but I've lived in IL my entire life and have had to deal with FOID's. I can see both sides of the argument, but I have more of a problem with the slippery slope argument. I agree with wmgeorge that something needs to change. Having said...
I think it's a little hasty to make the prediction that prices aren't ever going to be back to where they were. The same thing was said during the last panic and it wasn't that long ago that prices came back down to where they were, and if you factor in inflation, may have been lower. What was...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.