Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
A friend is looking to sell a Colt 357 mag White Tailer NIB. It came with a scope mounted and a duel lock case. He's looking for $2800 claiming they are very rare. I wasn't looking for one but it did catch my attention. Any info would be appreciated.
Thanks,
Massman
If memory serves me I believe there were some issues with the first batch of 686's. If dropped they could fire. Smith recalled them and once checked they put the "M" stamp on the gun as a way of showing the gun had be checked and was cleared as "safe". If you look you often see the "M" is not...
I'm with you Coal Dragger, the Ruger and Browning are nice guns but the S&W 41 is definitely the way to go if finances allow it. Also, I'm surprised it took so long to mention the S&W 41.
I have one I bought in 96 or 97. It went back to Taurus for a barrel problem and since then it has been perfect. A friend wants to but it and I am trying to decide whether to or not to sell it. He made me a generous offer but the damn thing shoots more accurately than my Beretta 92. I'd sell him...
I have 2 S&W 1911s, one of which is a performance center model. I love both and have never had an issue with either. I have friends who own the Ruger but I have yet to shoot one. That being said, a fellow named Mochak, who worked in the S&W performance center, left (or retired) from S&W when he...
Thank you again gentlemen. When I said the "regular" model, I meant the current "Classic" line of 57's vs the 57-5 Mt. Gun reintroduced in 2005. Sorry for my lack of clarity. Does the Mt. Gun carry any extra value since it was considered "limited"?
Gentlemen,
Thank you for your input. I had checked a few sources but wanted "real world" opinions for what this gun would sell for. I can't find any values for the mod. 57 Mt. Gun. 22-rimfire, are you saying the Mt. Gun version of the Mod 57 is valued lower than the regular version of the gun...
A friend's brother has a S&W model 57-5 Mountain gun NIB (never fired) he wants to sell. He is a long gun guy and is thinning his herd of handguns. I asked what he wanted and he told me to make an offer. I have no idea what this model is worth as I can't seem to find much info on it. He claims...
Mizar,
When I hold and slowly release the trigger there is no rubbing. You said when the hammer falls to the 1/2 cocked position it damages the sear. I will once again show my ignorance. When I look at the schematic from Browning, I see #27 = sear lever type II and # 29 = sear spring w/ button...
Gentlemen,
Interesting day at the range. Completely cleaned the gun to be sure nothing was gummed up. Re lubed everything and set out.
Loaded the first clip with 5 rounds. 1st 3 went as should, then a new problem arose. This time when the gun cycled a new round and I pulled the trigger the...
help with Hi-Power
goste,
My problem is slightly different. I rack the slide and pull the trigger and nothing. But when I cock the hammer manually and pull the trigger, I get ignition.
Out of curiosity, were you able to correct the problem and how did you resolve it?
Thanks,
Ed
Mizar.
The firing pin length is 57.20 mm. When I drop the firing pin into the channel it falls in freely, but I have to tap it lightly to get it to fall out. I will spray some gun cleaner into the channel to be sure it is absolutely clean.
Re: the hammer spring; from what I can see it was not...
Mizar, the pin is present under the nut so I guess that part is fine, although I do have a question. Can that nut be tightened or does it screw on just to the point where the pin can be inserted? I ask this because if it could tighten would that drop the hammer with greater force? Also, there is...
Mizar,
Thank you for your reply.
The gun was cleaned by a gunsmith about a year ago and my brother didn't get around to shooting it until recently. Too long a time to take back to the gunsmith in his opinion. I removed the firing pin and spring and cleaned the channel. The firing pin is fine...
My brother has a Hi-Power made in Belgium and is experiencing the following problems. When the gun is loaded by racking the slide, the gun will not fire when the trigger is pulled. When I cocked the trigger manually, the gun would fire, cycle a new round, and cock the hammer. Pull the trigger...
I purchased a 642 w/o the lock about 9 months ago and my dad purchased the same gun w/ the internal lock. His gun had a noticeably lighter trigger pull than mine. Using my 14 lb trigger gauge, I could not get the trigger to fire the gun. My 360PD and my 649 have much lighter trigger pulls...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.