I searched around and couldn't see that these were already posted, though I'll be surprised if they haven't been mentioned/discussed.
http://www.mibullet.com/index.html
These are bullets designed to immediately break into three pieces upon leaving the muzzle and are tethered together with...
Hoping someone can help me out. Does anyone know how much Palmetto State Armory sells their "Complete PSA AR15 Lower - MOE Edition" for when it is in stock?
http://palmettostatearmory.com/index.php/review/product/list/id/2420/category/387/
Thanks
I learned some really great news today. I recently moved from SC to TN and haven't been able to make the time to take the TN qualification course. What I found out from an LEO (and confirmed local DL office) is that I can simply "swap" my SC CCP for a TN one. I'll have to wait whatever...
I've just moved into a new place and am in the "hardening the home" phase of things. The place came with pretty good coverage by motion sensing lighting already installed- I'd really only want to add 2-4 more. The problem is that only 3 of the existing units work at all, and those not so well...
I am going to be moving soon and I'll need to take a hangun permit class. I was hoping to tap into some local knowledge to help me find a good class. If I'm going to sit through another class like I had to in SC, I'd like to get as much out of it as possible. I'm specifically moving to Cocke...
There may have been a better place to post this, but I'm not looking for legal advice with these questions.
I am considering putting a pistol up for sale and was wondering what buyers preferred to see regarding shipping. Is it best to just say "we'll work out shipping once you agree to...
The title pretty much says it. I'm looking for a quality IWB holster for a 3" 1911 with Crimson Lasergrips on it. With the seeming popularity of the Kimber factory model, surely there are some folks out there with recommendations. [FWIW, mine is a Colt New Agent, not a Mimber :neener:. Yeah...
I'm looking for some recommendations for an anti-seize compound for my supressor. In the past I've used automotive brake anti-seize and it seemed to work pretty well. I've lost my little tube of it though, and thought I'd ask for other folks' thoughts and experiences since surely there's...
The title pretty much says it. I'm looking for a 3-inch 1911 in .45. The LGS has one of these in stock and finances will currently allow it.
All comments of "a 1911 cannot operate well at less than a 4.25-inch barrel" will be ignored. I will be purchasing a 3-inch .45 caliber 1911 at some...
PSA= Palmetto State Armory
Like many folks new to ARs, I'm completely overwhelmed by the amount of information available. As wonderful as this site is, it's difficult to cut through all of the opinions/bickering and trying to guess at the value of any individual poster's input.
One thing...
If this story has been posted previously, or there is a better place to post it, Mods feel free to close or move as appropriate.
A friend forwarded this to me. I'll leave my personal comments aside for a while, but I'm sure many of you folks will find some good reading here...
I'm converting a Saiga and after getting a new stock, pistol grip, and handguard the trigger (3 parts) seems the logical next/"last" step.
I've only found a few options that say OK for Saigas and they get kinda spendy. The Tapco G2 trigger specifically says "not for use in Saigas" but Tromix...
I've got a barrel that measures 0.640-inches at the muzzle. It is not cut for a dovetail type sight or tapped for a screw in. I'd like to put some irons on this thing, but don't know where to look. I don't have the equipment to dovetail and I'd rather not go to a smith if I can avoid it...
Mods- Please move this if you think it belongs in a different forum. This seemed like the best place to me.
I'm looking for someone to make me a set of 1911 grips (govt size) out of a piece of Damascus steel I've got. I bought it thinking it would be a fun project for myself, but I don't...
Mods- if there is a better forum for this question, please move at will.
My soon-to-be father in law build a range at his house. Nicely done overall. He dug into a low rise, piling the dirt at the back resulting in a berm about 10 feet tall. He then lined the sides of the trench with...
How do you decide how far forward/back along the rail to mount a holographic sight on a pistol? From looking at pictures, it seems most folks place holo and red dot sights pretty much centered over the action/all the way forward on the rail.
On my Buckmark with a TacSol rail (the optic is a...
Just wondering if anyone out there had any experience with this product:
http://www.caswellplating.com/kits/black.htm#stainless
I'm specifically asking about their "Stainless Steel Blackener 370", and I'm considering their SSBGK deal for $20. I'm hoping this would be an economical DIY way...
I'm looking for an aperture sight to mount on a picatinny rail. I want windage and elevation adjustment. I'd like it to be as low/short as possible. Two apertures would be nice, but not necessary. Flip up-ability is not a requirement, though it seems pretty standard. This will be mounted on...
I posted this with a different title that I realized might not get many views. I'm closing the original and hoping the new title will get some responses and not scare folks off with too specific of a request. I hope this is okay with the Mods/forum rules.
I'm considering selling my PM40. I...
I wasn't quite sure where to post this- mods move as you see fit (or delete it altogether- no hard feelings). There are a lot of knowledgable knife folks in here though, and this forum seems to be the haunt. A chef knife could surely be used as a weapon, but for this discussion I'd rather...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.