the Black Spot
Member
Gonna throw this out there(and then duck for cover ).
I have access to some 40 s&w cases, which after they have been fired measure around .452 in diameter. Pretty good for 45 colt.
What if i filled the case with melted lead, let harden, then used these inverted(so the base with fired primer is now the front of the bullet) for a wadcutter? I could crimp right under the case head.
I have access to some 40 s&w cases, which after they have been fired measure around .452 in diameter. Pretty good for 45 colt.
What if i filled the case with melted lead, let harden, then used these inverted(so the base with fired primer is now the front of the bullet) for a wadcutter? I could crimp right under the case head.