wiiawiwb
Member
- Joined
- Jun 30, 2010
- Messages
- 302
I am reloading my first 10mm round and made up a dummy one. I am using new Starline brass and MBC .401 diameter 170 gr SWC:
http://missouribullet.com/details.php?prodId=218&category=20&secondary=11&keywords=
Lyman's 49 shows maximum OAL of 1.260. I've seated the bullet in the middle so that the OAL is 1.259. It is seated deeper than I thought it would be. I thought it would end up midway between A and B. It's ending up almost to A. For comparison purpose, on the left is a factory round from Hornady, 180 gr XTP and it measures 1.252. The reloaded round meets the barrel plunk test and feeds into my Glock 40 just fine.
Does the seating depth look correct?
http://missouribullet.com/details.php?prodId=218&category=20&secondary=11&keywords=
Lyman's 49 shows maximum OAL of 1.260. I've seated the bullet in the middle so that the OAL is 1.259. It is seated deeper than I thought it would be. I thought it would end up midway between A and B. It's ending up almost to A. For comparison purpose, on the left is a factory round from Hornady, 180 gr XTP and it measures 1.252. The reloaded round meets the barrel plunk test and feeds into my Glock 40 just fine.
Does the seating depth look correct?
Attachments
Last edited: