HoosierMax
Member
Can I get some advice on load data for use in my TC Encore 357 Max. I have a 24 Inch MGM barrel and would like to use 1680 pushing 180 Gr nosler partitions. thanks
180 grain nosler partition question
- Thread starter HoosierMax
- Start date
- Status
witchhunter
Member
Have you tried AA load site? I know 296 and 4227 work well in the max, I have never used AA1680.
Dudedog
Contributing Member
.357 Maximum (NOT 357 mag maximum loads)
Lee lists 180gr Jacketed accurate 1680
Start 23.9 1732, Max 26.5 1968
OAL 1.57
Don't own one, never tried these loads, use at your own risk.
Lee lists 180gr Jacketed accurate 1680
Start 23.9 1732, Max 26.5 1968
OAL 1.57
Don't own one, never tried these loads, use at your own risk.
GooseGestapo
Member
- Joined
- Jan 6, 2003
- Messages
- 6,164
Lee #2 gives AA1680 w/180gr jacketed data:
Start: 23.9gr 1,732fps Max: 26.5gr 1,968fps 41,000 cup @2.19"min.
edited to add: case length is 1.605" I suspect dudedogs got a tyyppo !!!
Start: 23.9gr 1,732fps Max: 26.5gr 1,968fps 41,000 cup @2.19"min.
edited to add: case length is 1.605" I suspect dudedogs got a tyyppo !!!
Last edited:
Swampman
Old Fart
From an Accurate PDF file (version 3.5) of load data that I've got.
It's not for the Partition, but it's the best I have.
Data is listed as being from a 10" Contender.
If you'd like a copy of the actual file shoot me an email and I'll send it to you.
1680 180 HDY HP-XTP 25.5 1,724 28.3 1,884 39,500 2.025
1680 180 HDY SSPB 27.0 1,692 30.0 1,850 27,470 2.350
It's not for the Partition, but it's the best I have.
Data is listed as being from a 10" Contender.
If you'd like a copy of the actual file shoot me an email and I'll send it to you.
1680 180 HDY HP-XTP 25.5 1,724 28.3 1,884 39,500 2.025
1680 180 HDY SSPB 27.0 1,692 30.0 1,850 27,470 2.350
- Status
Similar threads
- Locked
