$209 for complete 16" AR M-Lok handguard rifle kit

[LiveLife]

$209 16" AR M-Lok handguard rifle kit without bolt carrier group (All parts USA made with lifetime warranty). I got the .223 Wylde 1:8 SS barrel upgrade for $15 (shipping was $11.95).

SA16 "Operator" Series 16" 1:8 Parkerized Carbine Builder Kit with Predator Stock Kit 12" M-LOK Handguard (+$15 for Bear Creek 16" .223 Wylde 1/8 Stainless Steel Barrel Upgrade)- http://www.22mods4all.com/SA16-Oper...dator-Stock-Kit-12-M-LOK-Handguard_p_176.html

15" M-Lok Handguard kit $219 - http://www.22mods4all.com/SA16-Oper...dator-Stock-Kit-15-M-LOK-Handguard_p_177.html

Scorpion Armaments Stripped MILSPEC AR-15 Upper. M4 Feed Ramps, Made of 7075 T6 Aluminum

1. Forward Assist & Port Door Assembly
2. Steel Gas Block and Gas tube and roll pin
3. 12" 6061 T6 Aluminum M-LOK Handguard & Barrel Nut
4. Bear Creek Arsenal 16 Inch 5.56 NATO Parkerized Barrel 1:8 Twist 1/2x28 tpi Threaded for muzzle (Bear Creek 16" .223 Wylde 1/8 Stainless Steel Barrel Upgrade)
5. A2 Flash Hider & Crush Washer
6. Forged Charging handle
7. Scorpion Armaments Lower Parts Kit
8. MIL-SPEC BS-8 Predator Reinforced Polymer Six-Position Adjustable Stock Kit & Buttstock

All parts are quality made here in the USA from the barrel to the smallest screws and pins, and carefully inspected for defects to meet strict in-house criteria. Our gun-smiths are military veterans with several decades of combined military experience, and take pride in the quality of their work and attention to detail. All orders come with a limited lifetime warranty on parts ensuring a smooth transition for any replacements or repairs.

 

[someguy2800]

No bolt carrier group but a pretty awesome deal if you already have that.

 

[LoonWulf]

209, +70-90 for bcg, +30-60 for lower

Ar for 350 is pretty good, wait for deals, source your bcg and lower right, and you could be very close to 300.

If i didnt just waste what little spending money i had on gunbroker, id probably jump on this.

 

[MachIVshooter]

It looks like a good deal, but I'd rather spend a little more on a known quantity. I strayed once, gave a SODA arms complete upper a shot, and it bit me in the posterior.

PSA has several kits in the $340-$420 range right now with free shipping, all of which come with BCGs, and many sporting Magpul furniture and MBUS sights. This is one of the best deals, IMO: http://palmettostatearmory.com/psa-...-rifle-kit-with-mbus-sight-set-516446484.html

 

[LiveLife]

I ordered plenty of uppers/kits from PSA. Just received PSA 18" .223 Wylde 1/7 SS Keymod upper with BCG/CH and MBUS sights for $319 shipped - http://palmettostatearmory.com/psa-...per-with-bcg-ch-mbus-sight-set-516446454.html

My attraction for SA16 kit was the $15 upgrade for Bear Creek 16" .223 Wylde 1/8 SS barrel for $235 shipped price. I have plenty of BCGs.

I wanted .223 Wylde chambers and M-Lok/Keymod handguards. For plinking fun around 100 yards, I figure these should do well.

 

[redneck2]

My attraction for SA16 kit was the $15 upgrade for Bear Creek 16" .223 Wylde 1/8 SS barrel for $235 shipped price. I have plenty of BCGs.

I can get a mil-spec FA BCG for about $90. So we're talking +/- $320 for a complete rifle?

 

[LiveLife]

Davidson Defense "Competition Edition" AR-15 Rifle Kit (Without bolt carrier group) with Colt Competition 16" 5.56 NATO 1:8 Barrel & 12" Slim Keymod Handguard + Bonus Flip-Up Sights for $229 - https://davidsondefense.com/davidso...2-slim-keymod-handguard-bonus-flip-up-sights/

Kit includes:

• Digital Tool Forged Upper Receiver (The largest OEM manufacturer for the US Military)
• Trinity Force Echo 12" Slim KeyMod Handguard
• Colt Competition Overrun High-performance 16" barrel chambered in 5.56 NATO with a 1:8 twist with a SBN nitride finish
• Mil-Spec A2 Flash Hider & Crush Washer
• DPMS Forged Charging handle
• Tactical Superiority Lower Parts Kit (USA-Made)
• Ejection Port Door Assembly
• Carbine gas Tube & Gas Block
• Trinity Force Omega Stock & Buffer Kit
• Trinity Force Poly Flip-up Sight Set (Front & rear)

 

[MachIVshooter]

^^^^
I know for a fact that one has a bunch of chinese parts. I've seen those Trinity handguards up close, seen them installed, and they're garbage. Same for that stock kit. A friend of mine was slinging some of those through his shop during the banic when he couldn't get the good stuff; the stocks are junk, and the extruded tubes (which are commercial diameter AFAIK) were sometimes too shallow, causing rifles to not lock on empty or even become single shots.

"Digital Tool Forged Upper Receiver (The largest OEM manufacturer for the US Military)"

I've never heard of that company, and they're definitely not forging for Colt or FN, so......

 

[LiveLife]

That's good to know.

My 16" .223 Wylde 1/8 SS kit ordered from 22mods4all was advertised as all USA made.

 

[HankC]

How about this one $289 shipped. Everything except lower receiver. Can we expect $269 AR kit Labor Day deal or $199 Black Friday sale? PSA now has 308 AR at $460 (complete upper + complete lower), AR is in the a 22LR range!
https://outdoorsportsusa.com/index.php?route=product/product&path=120&product_id=605

 

[MachIVshooter]

That's good to know.

My 16" .223 Wylde 1/8 SS kit ordered from 22mods4all was advertised as all USA made.

The stock is suspect, but I have no good reason to doubt the rest. I've never seen that stock style from a domestic manufacturer, and it's clearly a comm spec tube, which have all but dissappeared from US makers, except UTG.

 

[Ks5shooter]

Commercial tubes are still on Windham stuff. It was on my 7.62x39 Wyndham.