wish-a-lot
Member
- Joined
- Feb 7, 2017
- Messages
- 14
This is the full story.
A cartridge Hornady .308 trimmed, sized, chamfered and deburred.
Full sizing die was set by touching the ram then 3/4 turn more.
powder added. Cast lee 30 cal 150 gr. (actual 149 to 149.9) seating depth so OAL was 2.65.
Made 170 Gr. Complete OAL of 2.750 but when 150s continually jammed I didn't bother trying them.
What's causing this?
The Rifle is a Browning Exclipse Target with a 28" barrel.
Please help me.
A cartridge Hornady .308 trimmed, sized, chamfered and deburred.
Full sizing die was set by touching the ram then 3/4 turn more.
powder added. Cast lee 30 cal 150 gr. (actual 149 to 149.9) seating depth so OAL was 2.65.
Made 170 Gr. Complete OAL of 2.750 but when 150s continually jammed I didn't bother trying them.
What's causing this?
The Rifle is a Browning Exclipse Target with a 28" barrel.
Please help me.