scythefwd
Member
from cartridge diagrams, it would work. The cases are only .001 different width. The 10mm is loger, but that just means a bit more jump to the lands. I wouldn't caim it was accurate but could it be done?
The Smith 610/310 10mm revolvers can also fire .40S&W with moon clips.
Yes, it can and you do not need to change the springWell since the cartridges are so nearly the same could this not be done with a quick switch to a .40 barrel and lighter recoil spring?
if you're lucky. i mean think if the firing pin hits and the case goes slamming back to the breach and probably piercing a primer and damaging a firing pin. but maybe the cartridge just says there and your attempt to clear it pushes another round behind it.machIVshooter said:and if the extractor doesn't grab them, it'll go too deep in the chamber and most likely not fire at all.