MifflinKid
Member
Try these, step by step, test firing after each.
1. Tighten the strain screw as RC suggested.
2. If you have another N frame that fires reliably, try switching strain screws.
3. Clean the chambers, recoil shield and cylinder ratchet.
4. As ClemY suggested, install an Apex Tactical XP firing pin. I had the same problem with a recent manufacture M625. This solved the problem.
1. Tighten the strain screw as RC suggested.
2. If you have another N frame that fires reliably, try switching strain screws.
3. Clean the chambers, recoil shield and cylinder ratchet.
4. As ClemY suggested, install an Apex Tactical XP firing pin. I had the same problem with a recent manufacture M625. This solved the problem.
5. Get these and install --
6. Send it back to Smith and Wesson.
Last edited: