I'm changing from Unique to Titegroup for some .357 loads for some 158 gr LSWC's. The lee manual list the min-over all length for Unique to be 1.580 starting at 6.0 gr. My bullet seating die is set at 1.585. The manual list the OAL for Titegroup at 1.610 with a starting charge of 4.5 gr of powder. I loaded a dummy round at 1.610 and the edge of the case doesn't seat fully into the crimping groove as it does at 1.585. My question is can I stay at 1.585 with this load?
Thanks, Flip.
Thanks, Flip.