Any custom built Mini's out there?
- Thread starter Arc-Lite
- Start date
- Status
Gunsnrovers
Member
Now that's funny. I had a flashback to Peewee's Big Adventure: Paging Mr. Herman, Mr. Herman you are wanted at the front counter...
Yes I must admit Windu is the guy to talk to when it comes to overhauling the Mini. He knows the system inside and out. Just don't him rolling on the Mini-14 vs. AR vs. AK vs. M82A1-a vs. FAL/G3/M1 vs. M249 vs. Vulcan Cannon. We'll be here all night.
Just KIDDING Mace.
BTW: Those guys at Perfect Union are INSANE what they have done with the Mini, and some of their ideas are cheap ones too. It looks like you could get the average Mini under 1.75" MOA for less than $150. Tack that to a used Mini ($340 locally), that's not bad.
Mace !!!
....so tell me Mace ...who built your Mini...and what did you have done? I checked the perfect union web site....Guns and Rovers suggested.... and lots was said about the gun doc... in Florida, looked at the site...and not much was said about the mini.Any knowledge of Accuracy Systems of SC ? Nice looking M-14....on the other thread. Arc-Lite
....so tell me Mace ...who built your Mini...and what did you have done? I checked the perfect union web site....Guns and Rovers suggested.... and lots was said about the gun doc... in Florida, looked at the site...and not much was said about the mini.Any knowledge of Accuracy Systems of SC ? Nice looking M-14....on the other thread. Arc-Lite
SS Mini Ranch
1 inch diameter 18 inch length Douglas Premium Stainless Bull Barrel
Enlarged Gas block
4 lb. trigger job
Trigger shoe
Recoil buffer
Screw bedded. (3 places)
Picatinny Rail
Arms #22M68 QD Ring
Aimpoint CompM2
Black Cheek rest...
Done by www.accuracysystemsinc.com
Downside: 6 MONTH WAIT!
MaceWindu
1 inch diameter 18 inch length Douglas Premium Stainless Bull Barrel
Enlarged Gas block
4 lb. trigger job
Trigger shoe
Recoil buffer
Screw bedded. (3 places)
Picatinny Rail
Arms #22M68 QD Ring
Aimpoint CompM2
Black Cheek rest...
Done by www.accuracysystemsinc.com
Downside: 6 MONTH WAIT!
MaceWindu
thank you Mace... sounds very nice... was this one of Accuracy Systems packages....or a pick and choose build? wait time is cool, when its done right, if they said 2 weeks...would make me wonder, if I were their only customer !!! how long ago did you do the build? Arc-Lite
asi mini
We got one done,so done its got its own fork. .900 barrel,enlarged gas block,20" ss 1x9 barrel, pillar bedded ,sweet trigger 3.25lbs, the funky m1carbine site ,but we shoot 1 to 1-1/2 groups with them and less with the cheap tasco or simmons scope. Something like .75" or a liiittle less at 100 yds with no wind. Trying now for a new site rig peeps of some kind and a mo better scope. I am not disapointed we got what we ask for and am damn proud of her,They did a good job overall on this rifle [ASI]. The rifle shoots better with some one else shooting and tho heavy it is remarkably balanced.
I wood would recomend the work of ASI tho set your parameters better than we did and comminicate mo better. been offered $ i have in the project by 2 folkks locally,Yeah right I said. We waited but we were in no hurry as some are. Several other plinkers in use. Basically shipped it and forgot it except a couple emails and 3 or 4 call on the phone trying to clarify the options not checking on the when, Sorry for the long answer. It is my second fav rifle,1st is the m1a SA . The time factor was no issue with us when the project was going on. Be ready be patient be clear .
We got one done,so done its got its own fork. .900 barrel,enlarged gas block,20" ss 1x9 barrel, pillar bedded ,sweet trigger 3.25lbs, the funky m1carbine site ,but we shoot 1 to 1-1/2 groups with them and less with the cheap tasco or simmons scope. Something like .75" or a liiittle less at 100 yds with no wind. Trying now for a new site rig peeps of some kind and a mo better scope. I am not disapointed we got what we ask for and am damn proud of her,They did a good job overall on this rifle [ASI]. The rifle shoots better with some one else shooting and tho heavy it is remarkably balanced.
I wood would recomend the work of ASI tho set your parameters better than we did and comminicate mo better. been offered $ i have in the project by 2 folkks locally,Yeah right I said. We waited but we were in no hurry as some are. Several other plinkers in use. Basically shipped it and forgot it except a couple emails and 3 or 4 call on the phone trying to clarify the options not checking on the when, Sorry for the long answer. It is my second fav rifle,1st is the m1a SA . The time factor was no issue with us when the project was going on. Be ready be patient be clear .
Open Road,exactly correct.Its all there. Just in different placesLOL!
We tried to find a new rifle in .223 a mini garand ,scaled down and every thing or a mini m1a scaled down in pro porsion . It would have been a good project.
the reciever and trigger would be what is left of the original anchor.the rest is in the vaullt layin there. Been thinkin of donatin the left overs to a deserving soul somewhere.
That rifle is absolutley worth what I paid for it . It is one idea that was kicking around for years. It is what I wanted.
We tried to find a new rifle in .223 a mini garand ,scaled down and every thing or a mini m1a scaled down in pro porsion . It would have been a good project.
the reciever and trigger would be what is left of the original anchor.the rest is in the vaullt layin there. Been thinkin of donatin the left overs to a deserving soul somewhere.
That rifle is absolutley worth what I paid for it . It is one idea that was kicking around for years. It is what I wanted.
sturmruger
Member
Mace I hate to ask but what did it cost to get your Mini all tricked out like that?? That is one sweet looking Mini 14.
Arc-Lite...
...I am not saying that they are not a good company or that they do not provide good customer service...only that time frame seems a bit unrealistic....best thing to do:
*Pick the plan you want + any extra's (Be specific, re. what you want, pm me for specifics)
*Send them your carbine
*Forget all about the project until you get it back
Calls once a month, for updates are good.
MaceWindu
...I am not saying that they are not a good company or that they do not provide good customer service...only that time frame seems a bit unrealistic....best thing to do:
*Pick the plan you want + any extra's (Be specific, re. what you want, pm me for specifics)
*Send them your carbine
*Forget all about the project until you get it back
Calls once a month, for updates are good.
MaceWindu
- Status
