ATF SBR engraving clarification

[rjrivero]

If you're using a stripped lower, then the model is already on the lower as is the serial number. The caliber is usually either on the lower or on the barrel. I have never engraved a SBR with a Caliber.

You only have to add the Name of the Trust, City, and State.

If you're using an 80% lower that you must mill and finish, then you need to assign it a model name, serial number, caliber. Then you must add the Trust Name, City, and State as well.

 

[GoingQuiet]

thanks for the info!

so:

model
serial number
caliber
trust name
city state


right?

Depends. You can utilize existing makers marks if you are re-manufacturing.

In many cases this involves you only having to put maker info / location.