Tex4426
Member
found this on a website and wanted to share it with my pyrotechnic friends who like to shoot things that blow up...this stuff is safe as long as directions are followed..i have not tried it yet but will this summer..have fun and use responsibly
The below information is for educational purposes only. I take no resposibity of its contents. I am not a lawyer or an expert. So if it doesnt work, or you get in trouble with the law its your own fault. Do not email me questions about this.
Well after a week of people begging me to post the recipe to a "reactive target" I decided to type this up. I was going to have pictures and suppliers listed but the demand for me to post it has prevented me from finishing what I had planed.
This reactive target is very similar to a name brand version already popular to the shooting community. They share some similarities and some differences. My version does not produce as much smoke and only works in enclosed containers of about 10 ounces or more. The trade off is that mine produced a bright flash, which looks cooler.
This reacitive target is similar to the popular commercial version in that it's a binary explosive. Which means its made up of two parts, and why it is legal to own.
You must follow all the below rules or else you will be in violation of the law.
Rules:
1. The two parts must be stored and transported separately (in different containers).
2. Once you mix them together you must use them immediately. You cannot mix them together and then drive to the shoot site or store them. This is why its legal to use this mixture. When the two parts are stored and transported separately it is legal. However once you mix them together it is an explosive and must be used on site.
3. Use of the explosive must not harm any one or any thing(except for targets at the shoot site) or be used in any way that is unlawful.
Ok now that's out of the way below is the mixture.
95% AN 5% AL by weight
AN = Ammonium Nitrate
AL = ALUMINUM POWDER
AN can be found online or at a local agricultural/fertilizer store. It comes in a 50lb bags at about 0.27-0.33 cents a pound. Very cheap. Make sure you get the bags marked as
34-0-0
and NOT urea nitrate.
When you purchase the AN in this form its coated with a some stuff that allows it to release slowly so you must prepare it for use. This is very easy to do.
Go purchase a cheap blender (actually buy 2) at Wal-Mart for $13 bucks.
Next fill the blinder about halfway and turn it on. Grind the stuff up until its about the consistency of about table salt. Since every blender is different you will have to experiment with the correct setting to get it correct.
Since AN is actually pretty stable until around 840 degrees Fahrenheit the heat generated in the blender will not set it off. But to be safe do this in a well venlated area with NO open flames.
Once its ground up I recommend you purchase some of those re-sealable paint buckets sold at Wal-Mart for a few bucks that are air tight.
Store it in this because it is hydrosorbic meaning it sucks up the moisture from the air. You can tell if its absorbed moisture from the air if it is clumped together in hard clumps. If this happens break the clumps apart and dry it out.
Now the AL is just as easy to prepare. You can find it online really cheap at about $7.00 a pound. You want to purchase it in 300-600 mesh but you can save some money by purchasing it in meshes less then 300 and grind it up your self with the second blender you purchased.
It's a good idea not to use the same blender you used for the AN because it can cause contamination.
To grind up the AL fill the blender up about half way. You want to get it to a very fine powder like flour. Since every blender is different you will have to see what power setting works the best.
Once its ground up I recommend you purchase some of those re-sealable paint buckets sold at Wal-Mart for a few bucks that are air tight.
Store it in this because it is hydrosorbic meaning it sucks up the moisture from the air. You cant tell if its absorbed moisture from the air if it is clumped together in hard clumps. If this happens break the clumps apart and dry it out.
Now that you have your two containers one with AN and the other with AL its time to go to the range. Once there to mix it together you are going to need a kitchen scale. You can find these at Wal-Mart cheap.
Start with the following to make sure it works:
100g AN mixed with 5g AL
Using a 20-ounce coke bottle with screw on top works best. Pour the amounts into the container and shake them up until they are mixed together. Remember once you mix them together you must use them at the site. You cannot drive or store the stuff mixed together.
Also remember the formula for mixing:
X * 0.05 = Y
X = Weight of AN
Y = Weight of AL to mix with that amount of AN
50 pounds of AN = 22,679.6185 grams
so using the above formula
22679.6185 * 0.05 = 1,133.980925
1133.980925 grams = 2.5 pounds of AL
So for every 50lb of AN you purchase you will need around 2.5lb of AL.
Now once the stuff is mixed the only way you can set it off is by shooting it with a .223 or above rifle or a number 8 blasting cap. Don't try setting it on fire, it makes a big gooey mess and around 840 degrees Fahrenheit nasty things can happen.
Once you have the stuff at the place you want to shoot it get back about at least 100 yards.
Have fun.
Ok below are some places I found to get the materials online.
E-bay has lots of people selling Aluminum Powder, this is probably the best place to get it.
Ammonium Nitrate can be hard to find locally if you don't live in a state that is primary agricultural. I found it was best to call around to local farm supply stores and ask. If they don't carry it, ask them if they know any one whom sales it. So long as you are not purchasing the stuff in huge amounts most people pay no mind.
You can purchase the stuff online, but shipping can be expensive to some areas.
This place has the stuff, the link goes to 50 pound bags for like $12, there online order cart didn't work for me. But you can call and order it that way with a credit card. Remember you want bags of 34-0-0 fertilizer.
https://www.horthippo.com/control/p...oduct_id=740100
The below information is for educational purposes only. I take no resposibity of its contents. I am not a lawyer or an expert. So if it doesnt work, or you get in trouble with the law its your own fault. Do not email me questions about this.
Well after a week of people begging me to post the recipe to a "reactive target" I decided to type this up. I was going to have pictures and suppliers listed but the demand for me to post it has prevented me from finishing what I had planed.
This reactive target is very similar to a name brand version already popular to the shooting community. They share some similarities and some differences. My version does not produce as much smoke and only works in enclosed containers of about 10 ounces or more. The trade off is that mine produced a bright flash, which looks cooler.
This reacitive target is similar to the popular commercial version in that it's a binary explosive. Which means its made up of two parts, and why it is legal to own.
You must follow all the below rules or else you will be in violation of the law.
Rules:
1. The two parts must be stored and transported separately (in different containers).
2. Once you mix them together you must use them immediately. You cannot mix them together and then drive to the shoot site or store them. This is why its legal to use this mixture. When the two parts are stored and transported separately it is legal. However once you mix them together it is an explosive and must be used on site.
3. Use of the explosive must not harm any one or any thing(except for targets at the shoot site) or be used in any way that is unlawful.
Ok now that's out of the way below is the mixture.
95% AN 5% AL by weight
AN = Ammonium Nitrate
AL = ALUMINUM POWDER
AN can be found online or at a local agricultural/fertilizer store. It comes in a 50lb bags at about 0.27-0.33 cents a pound. Very cheap. Make sure you get the bags marked as
34-0-0
and NOT urea nitrate.
When you purchase the AN in this form its coated with a some stuff that allows it to release slowly so you must prepare it for use. This is very easy to do.
Go purchase a cheap blender (actually buy 2) at Wal-Mart for $13 bucks.
Next fill the blinder about halfway and turn it on. Grind the stuff up until its about the consistency of about table salt. Since every blender is different you will have to experiment with the correct setting to get it correct.
Since AN is actually pretty stable until around 840 degrees Fahrenheit the heat generated in the blender will not set it off. But to be safe do this in a well venlated area with NO open flames.
Once its ground up I recommend you purchase some of those re-sealable paint buckets sold at Wal-Mart for a few bucks that are air tight.
Store it in this because it is hydrosorbic meaning it sucks up the moisture from the air. You can tell if its absorbed moisture from the air if it is clumped together in hard clumps. If this happens break the clumps apart and dry it out.
Now the AL is just as easy to prepare. You can find it online really cheap at about $7.00 a pound. You want to purchase it in 300-600 mesh but you can save some money by purchasing it in meshes less then 300 and grind it up your self with the second blender you purchased.
It's a good idea not to use the same blender you used for the AN because it can cause contamination.
To grind up the AL fill the blender up about half way. You want to get it to a very fine powder like flour. Since every blender is different you will have to see what power setting works the best.
Once its ground up I recommend you purchase some of those re-sealable paint buckets sold at Wal-Mart for a few bucks that are air tight.
Store it in this because it is hydrosorbic meaning it sucks up the moisture from the air. You cant tell if its absorbed moisture from the air if it is clumped together in hard clumps. If this happens break the clumps apart and dry it out.
Now that you have your two containers one with AN and the other with AL its time to go to the range. Once there to mix it together you are going to need a kitchen scale. You can find these at Wal-Mart cheap.
Start with the following to make sure it works:
100g AN mixed with 5g AL
Using a 20-ounce coke bottle with screw on top works best. Pour the amounts into the container and shake them up until they are mixed together. Remember once you mix them together you must use them at the site. You cannot drive or store the stuff mixed together.
Also remember the formula for mixing:
X * 0.05 = Y
X = Weight of AN
Y = Weight of AL to mix with that amount of AN
50 pounds of AN = 22,679.6185 grams
so using the above formula
22679.6185 * 0.05 = 1,133.980925
1133.980925 grams = 2.5 pounds of AL
So for every 50lb of AN you purchase you will need around 2.5lb of AL.
Now once the stuff is mixed the only way you can set it off is by shooting it with a .223 or above rifle or a number 8 blasting cap. Don't try setting it on fire, it makes a big gooey mess and around 840 degrees Fahrenheit nasty things can happen.
Once you have the stuff at the place you want to shoot it get back about at least 100 yards.
Have fun.
Ok below are some places I found to get the materials online.
E-bay has lots of people selling Aluminum Powder, this is probably the best place to get it.
Ammonium Nitrate can be hard to find locally if you don't live in a state that is primary agricultural. I found it was best to call around to local farm supply stores and ask. If they don't carry it, ask them if they know any one whom sales it. So long as you are not purchasing the stuff in huge amounts most people pay no mind.
You can purchase the stuff online, but shipping can be expensive to some areas.
This place has the stuff, the link goes to 50 pound bags for like $12, there online order cart didn't work for me. But you can call and order it that way with a credit card. Remember you want bags of 34-0-0 fertilizer.
https://www.horthippo.com/control/p...oduct_id=740100