Hornady sent one under warranty. I have the site saved with the Pyrex ones. The new one i got is frosted too. If it gets on my nerves im going to get a Pyrex one. And a clear one for my uniflo too. I also painted the red parts on the inside of the powder measure. The paint they did looked like just a dusting. And powder was sticking to it. It's now smooth. Im going to let it dry for 24 hours and see how it does.
Really? I have a couple of both and none are painted. The uniflo’s I have are green tinted plastic and the 55’s are clear or at least were before I left one sitting with powder in it..,
Those powder measures will dispense a lot more accurately once they have a coating of graphite in them from the powder your using.
They can be somewhat of a pain until they get coated up inside with graphite, so keep that in mind.
Getting the plastic drums off or on your measure will be easier if you gently heat the contact edge with a hair dryer or such. I once dunked it in hot water and that worked as well but it took time to wipe the water off before assembling and things cooled off.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.