Finally filled that elk tag!

Status
Not open for further replies.

xphunter

Member
Joined
Mar 21, 2005
Messages
912
Location
Gillette, WY
Sometimes what you think is going to be a relatively easy and quick hunt, turns into a longer process. This has been the case, to fill my cow/calf elk tag this year. I thought I might be having tag soup this year. The number of bulls I could've killed, at relatively short range was beyond me. A number of these were mature bulls, more in the average range, and there just seemed to be a lot more spikes than normal. With my schedule, Friday was going to be the last full day that I would be able to hunt. There was a chance that I could go out Sunday after lunch. The morning started off not seeing any elk at all, then around 8:30 AM we saw a lone cow, but she went over the top. She was not running away from us, but just moved over the top of the ridge away from us. I was determined that I was not going to let any opportunity bypass me, so I geared up to go after her. I never saw her again, but I did quite a bit of climbing, and the only path I could find down was quite steep with a lot of loose rock. Almost had some "pucker" moments.



We continued working our way south, checking north facing ridges, and we spotted a group of about 15 elk. At first, we didn't realize there were that many there. I left Mike and Bruce in the truck, and headed out again to what would be the longest stalk of my life in terms of time. I spent over two hours with five different stalks/approaches. Each stalk ended with me completely running out of cover, with the distance being further than I wanted to shoot. Hills and steep canyons combined with high winds meant I wanted to be under 400 yards.



On the next to last attempt, I decided to go around the ridge on the south side, then I planned to come over the top to make the shot as the ridge curved to the left where they were, but I could never really start it, because as soon as I got around the tip of the south side, I had about 150 head of elk from 800 to 1500 yards to the south. This is one of the few times where finding elk was a disadvantage.



I am on the same north facing slope that the elk are on, heading generally east, and my last option about 2/3 of the way down the ridge taking advantage of a few cedar trees and dead trees. I did a lot of crouch walking, making sure that I kept the trees between the cows and myself most of the time. There were more than several times to where I was in the open. If they were really looking at my direction or knew that I was there, I would have been busted. I just hoped that if I did blow them out, they would head north or east, and not go south and take out that huge group of elk with them. Patience paid off, as I found myself under a tree with pine needles and pine cones everywhere. I was a little surprised when I ranged them, that I was in the 350ish yard range…Finally!



I couldn't see as many of the elk from this vantage point, but the closest elk was a cow, actually a calf, but I wasn't turning down anything at this point. There was a narrow shooting window between rocks and trees, and my rangefinder although one of the better ones, was giving me different distances. 1 ¾ inches of vertical difference, wasn't going to make much of a difference so I picked the middle distance between the shortest and the furthest and dialed 4.5 minutes (350 yards). At the shot the whole area erupted with elk. There were more there than I thought. My calf (tender vittles) went down at the shot, but I briefly lost her at the shot. I immediately got my sight picture back and was reloading, when I saw her try to get up, and even though I knew she was probably already dead, I sent another one for insurance, and I saw her go down through my scope. Wouldn't you know it, about four maybe five cows ran off about 50 yards to my left and just stood at the top of the ridge looking around. They had no idea where I was. It is fun using different guns when hunting.

Earlier this week I decided to take my center-grip 6.5 PRC XP-100 that Tim King/King Custom Arms put together for me, which runs the factory Hornady 143 grain ELD-X at 2858 fps. Since I was also on the north facing slope with the elk and there was a slight curve to the slope, the elk and I were out of the wind for all practical purposes. Because of that I didn't hold for wind.

There can be a lot of frustration, when hunting doesn't work out the way that you expect it. But the memories and the reward are always greater, when you have to work for it. Bruce filled his cow tag earlier in the season. It has been fun hunting with him. Friday was a bonus as another good friend, Mike, was able to be with us.



 
Congrats. I’d LOVE to go after elk some day. I don’t know why it hasn’t happened yet (but I suspect it’s money). I may have missed it but what state is that?
 
Very nice, as always love the hand cannons. Your pushing that 143 as fast as a 24" -26" hot Creedmoor.
The accuracy and speed I am getting with factory ammo is a little surprising, but about where it should be.
This Lilja barrel shoots extremely well in terms of accuracy too
Hornady's factory offering with the 143 says it has a MV of 2700 fps, while loading using Reloader 26 would put one real close to my MV in a longer barrel.

Using ADG brass and H-1000 with a 140 Accubond we ran the MV up to 2923 fps. A 10-shot group at 100 yards with .5 grain increments, starting 57.0-61.5, with one shot each and still had 3/4 MOA group. MV's ran from 2731-2923 fps.
 
The accuracy and speed I am getting with factory ammo is a little surprising, but about where it should be.
This Lilja barrel shoots extremely well in terms of accuracy too
Hornady's factory offering with the 143 says it has a MV of 2700 fps, while loading using Reloader 26 would put one real close to my MV in a longer barrel.

Using ADG brass and H-1000 with a 140 Accubond we ran the MV up to 2923 fps. A 10-shot group at 100 yards with .5 grain increments, starting 57.0-61.5, with one shot each and still had 3/4 MOA group. MV's ran from 2731-2923 fps.
I've been liking h-1000 in my prc I'm about out tho, wish I could get some adg brass I think my hornady lot is bad since I get ejector marks with starting loads.

Your getting some really good speed, this mauser with its 24" has hit a little over 3000 with the 147 eldm. My cheap hunting load has shot amazing, one hole groups when testing. That's with a cheap speer 140 hot cor, hdy brass, wlr and 57.0 h-1000.

I don't recommend Winchester primers there a bit small then cci/federal and just about call out in 2-3 shots.

That's a great picture with the cow.
 
I've been liking h-1000 in my prc I'm about out tho, wish I could get some adg brass I think my hornady lot is bad since I get ejector marks with starting loads.

Your getting some really good speed, this mauser with its 24" has hit a little over 3000 with the 147 eldm. My cheap hunting load has shot amazing, one hole groups when testing. That's with a cheap speer 140 hot cor, hdy brass, wlr and 57.0 h-1000.

I don't recommend Winchester primers there a bit small then cci/federal and just about call out in 2-3 shots.

That's a great picture with the cow.

I am fortunate to have ADG brass, and Fed large match and CCI primers
 
The accuracy and speed I am getting with factory ammo is a little surprising, but about where it should be.
This Lilja barrel shoots extremely well in terms of accuracy too
Hornady's factory offering with the 143 says it has a MV of 2700 fps, while loading using Reloader 26 would put one real close to my MV in a longer barrel.

Using ADG brass and H-1000 with a 140 Accubond we ran the MV up to 2923 fps. A 10-shot group at 100 yards with .5 grain increments, starting 57.0-61.5, with one shot each and still had 3/4 MOA group. MV's ran from 2731-2923 fps.
2700 is for factory ammo in the 6.5 cm
The factory prc load is, 2970 both useing 26 in barrels
 
My x bolt hc speed in 6.5 creed useing hornady brass fed 210"primers & 44, grns of hogdon super perform pwdr pushes the 143 eldx @2790 /w"24in 1/8 twist 6 groove bbl
My 280 ai useing 57.grns of super performance pushes, the 150 eldx @ 3039 fps witb a, 24 inch barrel.
 
Status
Not open for further replies.
Back
Top