GSG AK47 - range report

Status
Not open for further replies.

Trekbike

Member
Joined
Nov 10, 2008
Messages
70
Location
Middle TN
Okay, here is my report on the GSG AK47.

Info taken from GSG:
The GSG AK-47 in cal. .22lr is a product of German Sport Guns (GSG), with its location in Ense-Höingen / Germany. The GSG AK-47 was designed and constructed by a team which use 3D Cadcam Technology. The industrial production is located also in Ense-Höingen /Germany. We are proud to mark our product with "Made in Germany".

GSG is proud to be the only licensee worldwide of Mr. Kalashnikov for Real Firearms. During the Winter 2007 Michail Timofejewitsch Kalashnikov visited GSG in Germany in order to find out that his licensed product will be used only for civilian purpose. GSG developed the Kalashnikov in Caliber .22 for sporting purpose for civilian use only. Gun enthusiasts can shoot on targets, use just for fun for plinking, use for small game hunting or for practical shooting like IPSC-Shooting.

Rifle specs
Overall length 36.5”
Overall height 8.14”
Overall width 2.78”
Barrel length 17.72”
Rifling length 15.98”
Number of grooves 6
Weight w/empty mag 7.36 lbs
Trigger pull 5.6 lbs

Overall impression: The model I bought was the wood stock version. Originally I planned to buy the GSG-5 but liked the feel and look of the AK much more. The fit and feel of the rifle is very nice. I read somewhere the stocks are made out of birch from Italy so it’s not the normal looking Romanian “2x4” wood. The rifle is made of a combination of metal, plastic, and wood. The attention to detail is true to the AR look. Although the GSG version is a .22 LR, the fit and finish is higher than you normally see in a centerfire AK. That is not to say that the reliability is on the same level as the legendary centerfire AK’s. The only things that clue people in that it is not a true AK, is the opening on the magazine and the lack of noise. The magazine is marked on the side to show the number of rounds in the magazine. Mine was the 24 round version.

At the range: The rifle is a blast to shoot. The best thing about the gun is knowing you can shoot a 500 bulk pack and be out less than $25. Note: You must shoot HV rounds for it to cycle properly according to the manual. It handles well and the iron sights are adequate out to about fifty yards but that’s about it. You will need optics past that point unless the target area is large due to the sight size to target ratio. The rear sight can be adjusted for elevation as can the front. There is no adjustment for windage.

Range day #1
I ran 288 rounds of Winchester xPert HVand experienced about 7 rounds that failed to clear the bolt before it tried to close again. The bolt also failed to lock open on an empty mag 2 times. I also had about 3 failure to feeds. That was the only ammo I had with me that day. In summary, it doesn’t like this ammo.

Range day #2
I took several types of bulk packs this time around.
Remington Golden bullet – brass coated - shot 96 rounds – 2 failure to clear the bolt
Winchester Dynapoint Target – copper coated – shot 226 rounds – 2 failure to clear the bolt
Winchester Wildcat – uncoated lead – shot 48 rounds – 3 failure to clear the bolt
Winchester XPert – uncoated – same ammo as before to give it another chance. – shot 24 rounds – 2 failure to clear the bolt
I had no failures to lock open on an empty magazine

The rifle likes the Winchester Dynapoint Target the best of what I have tried so far as reliability and accuracy. I got those at Dick’s for about $22/500. The Remington Golden bullet is not far behind. The rifle does NOT like the Wildcats and XPert. I’ll end up shooting those in my revolver just to use them up.

I think the rifle has the capability of being more accurate a shot than me. Regardless, I have attached a few target pictures for reference. I think it will take a few trips to get use to the gun and continue to work with different types of ammo. Optics would really help.

See the picture to explain my term “failure to clear the bolt”

The trigger is not crisp like a hunting rifle by any means but it’s not terrible IMO.

Break down of the rifle is easy to accomplish with the supplied tool kit. The trigger group comes out as one assembly as does the action. See the pictures.

The rear wood stock does not have a sling mount. There is one sling mount in front of the fore grip but it doesn’t seem strong enough to hook a sling to even if the rear stock had a mount. The synthetic version does have both sling mounts.

Summary:
Overall I am happy with the rifle so far. Only time will tell about the reliability since this just came out. As time goes by I’m sure there will be some official reviews on the gun. So if you are looking for a tacticool .22 plinker, check this one out.

3798434727_39820dbae6.jpg
3798435047_e3981b6f9f.jpg
3799250668_70031dd402.jpg
3799250956_1b78fdc055.jpg
3799251750_f8dbc66d7b.jpg
3798435745_31f573da6c.jpg
3798435533_fe63d02ed4.jpg
3807004875_9d03cdf569.jpg
3807004663_6823a9b6d7.jpg
3807004533_fe967b2316.jpg
 
wow, i've never seen one of these here. how much do they run for although i prefer the carbine gsg5. they are rare and come as quick as they go. the gsg pistol no one here seems to be intrested in, they're still sittin on display since day one.
 
Looks like it has a thread protector on the muzzle - is the barrel threaded?

Yes and no. The actual barrel is inside a tube. The tube has female threads and the muzzle adapter threads into the tube.


how much do they run
They are not cheap and will run you about the same cost as the GSG5. I had to pay $500.
 
I'm guessing those magazines for the AK version will be expensive.


I've seen online ones running from mid to high $30's. My local shop has some coming for $31 and change.
 
Does it use an actual AK action, or something more accurate?

The action of the rifle is totally different than a normal AK. The GSG is a standard blow back action typical of .22 rifles.
 
Is that optics rail functional and compatible with AK side mounts?

I don't know for sure but I'm guessing not. I think they just patterned the style/look of the AK mount. GSG does offer the side mount optics/accessories that they make.

The current side rail on the side is plastic but they sell a metal version that they recommend if you add the optics.

Below is a picture of a synthetic version that has been tricked out.

3746184151_0f67298ba1.jpg
 
...

they´re no making drummags, are they :)


Very cool.
Till now o thought the "Nylon"
would be my go to plinkster.
 
I have been very pleased with my GSG AK47 too. The wood and fit and finish of the metal is really good. Soooo much better than my Romanian AK47.

I like using the 40 grain CCI MiniMags HV the best. My gun chokes on the cheap Winchester Bulk stuff from WalMart. Federal Bulkpack is ok, but nothing special as I still get a few FTFs and FTEs.

mygsgak.jpg

mygsgak2.jpg
 
Looks like fun; after my experience with AKs, the only way I'd own another one is if it was one of those .22s, as they look to be all sorts of amusing.
 
Er, just to clarify, are the groups shown from a bench rest?

I only ask because I see much tighter groups out of my GSG-5. My sights are high and right no matter what I do, but your targets look like like my offhand groups at those ranges. Er... no offense! :D

I may just be lucky, though. Out of the 1,000 rounds or so of cheap bulk through my GSG-5, I only had one failure to feed (and of course it was when I tossed it to another guy who wanted to try it, FTF on the second shot) using cheap ammo (Winchester PHP bulk and Federal AutoMag bulk) - This does NOT seem to be the norm for other GSG-5 owners.
 
Very nice. I'm still waiting for a .22 patterned after my beloved FAL. :p
The only "tacticool" rimfire I've handled is the SIG 522LR, and it was a nifty little thing. A great deal of fun at the range, $550 is a bit much for a range toy.

Thanks for the info.
 
Ah, OK - Solid groups then, and I think that may convince me that I need one of these. :) If you throw some optics on it or get it on a bench, be sure to update us!

I was leaning towards the synthetic one, but after hearing positive review after positive review over how nice the fit and finish on the wood model is, I may just have to spring for one of those.
 
I have the GSG-5 rifle an my buddy has the pistol, The Blue box Federal copper coated hollow points work perfect, muzzle velocity 1280 fps, but the Federal Red box copper coated at 1260 fps at the muzzle won't work. Just the small borderline makes a differance. If you try some Federals let us know how it worked in yours.
 
Soooo i picked up this gun a few weeks ago and just found the time to take it out but when i got home to clean it i realized i misplaced my manual if ne one could post some picks of the manual or help me figure this one out id be much greatful
 
nice looking toy, but $500?

do i see a buttplate, or is the stock not capped? looks nicer than the armi jaeger AK style 22rf that was made in the 80's, but i prefer my cuigur made gun, which is a true AK.
 
You photos are a classic stovepipe ejection failure. Check the extractor and ejector. If it were a Ruger 10/22 I'd say you need to spend $11 on a Volquartsen extractor. No idea what you need here, but check that the ejector is not loose and that the extractor does not have crud behind it.

--wally.
 
Status
Not open for further replies.
Back
Top