jenrob
Member
I have come up with a few thing and would like to here from others that have a Hornady progresive or even a dillon that makes thing easier. First thing I hear a lot about primer problems. Keep a can of air (like what you would use on your computer) to blow out the primer feed. This will also blow out the powder dispenser very well just do it outside. next I put a Dillon powder check die this is something that Hornady could take notesa on. This powder check doesn't require you to look at it. If I wanted to look to make sure I had powder I would just look in the case
Next Lee FCD put it in station 5 and pull the handle till it just touches the die using a regular screwdriver push the ejector wire just enough that the die will scape by it this will leave a mark on the die grind that area away then mark across the die bushing and a small mark on the press with a sharpie this will make it easier to make sure you get it in the same every time.
Next comes a bullet tray I heard somebody say that the Hornady isn't a arrognomic as the Dillon cause it doesn't have a bullet tray. If you get the case feeder it cames with a base that has a Akrobin hanger on it. I took the old one and cut it off bolted it to a piece of diamond plate and mounted it to the case feeder mount. The yellow bin in the picture is a little big just haven't gotten another bin. I made it to basically sit on top of the loaded road catcher when I have bullets in it. This also acts as a back board for those cases that like to fly away.
anything that you think up that might help or maybe something that you would like to see. Throw your thoughts out there and lets see what others can come up with.
Next Lee FCD put it in station 5 and pull the handle till it just touches the die using a regular screwdriver push the ejector wire just enough that the die will scape by it this will leave a mark on the die grind that area away then mark across the die bushing and a small mark on the press with a sharpie this will make it easier to make sure you get it in the same every time.
Next comes a bullet tray I heard somebody say that the Hornady isn't a arrognomic as the Dillon cause it doesn't have a bullet tray. If you get the case feeder it cames with a base that has a Akrobin hanger on it. I took the old one and cut it off bolted it to a piece of diamond plate and mounted it to the case feeder mount. The yellow bin in the picture is a little big just haven't gotten another bin. I made it to basically sit on top of the loaded road catcher when I have bullets in it. This also acts as a back board for those cases that like to fly away.
anything that you think up that might help or maybe something that you would like to see. Throw your thoughts out there and lets see what others can come up with.