Today I installed the 9mm Lee factory crip die in station 5. Ran a couple test crimps of 9mm and they were .377 which I think is fine for 9mm.
However the die is all the way down, there is no more adjustment... I set the die to just touch the shell plate, then screwed down the crimp adjustment all the way..
Is this ok.. I feel it should be fine...
Thanks,
However the die is all the way down, there is no more adjustment... I set the die to just touch the shell plate, then screwed down the crimp adjustment all the way..
Is this ok.. I feel it should be fine...
Thanks,