Lee FC die in Hornady LNL AP?

[Capt Roy]

Today I installed the 9mm Lee factory crip die in station 5. Ran a couple test crimps of 9mm and they were .377 which I think is fine for 9mm.

However the die is all the way down, there is no more adjustment... I set the die to just touch the shell plate, then screwed down the crimp adjustment all the way..

Is this ok.. I feel it should be fine...

Thanks,

 

[TheGreatDane]

I'm running mine in the LNL. Station 5 also, but I crimp to .380 for cast bullets. In the rare case that I load jacketed, It's .379.