Load data 168 gr Nosler LR Accubond

[kalielkslayer]

In a 7mm RM.

I have a pet load with the 160 grain Accubond, 209 of them left plus about 40 rounds loaded.

That said, on an impulse buy, I bought 100 of these. When I couldn’t find the 160s, I got it into my head to buy these, if available. It worked out the other way around.

I searched Loaddata.com and found data for the 168 grain Berger. I’ll use that, starting a couple grains below max if I can’t find Nosler data.

But I’m sure some guys out there in THR land have pet loads with this bullet.

And I will start low and work up.

Off the top of my head I have RL22, RL23, RL25, IMR 4831 and IMR 4831 SC. I also have RL 19 and IMR 4350 and although they were included in the Berger data, I feel they are too fast. RL25 was the velocity winner in the Berger data, but my 160 grain load utilizes RL22.

 

[Thomasss]

On the internet, go to Alliant Powder and select Products, then Rifle, scroll down to a powder like RL22 and click it. Next to the sizes shown in blue, select "All recipes". Find your caliber and click on it to see your recipe options. You can only look at one type of powder at a time.
If you go directly to Alliant's powder guide, they will only show their recommendation for your caliber, if any.

 

[IALoder]

IIRC Nosler has a little bit of free load data on their website, I'm guessing they'd have some for the 168 ABLR. I'd definitely be trying the RL23 if there's Data. My 7mm RM seems to be a big fan of the stuff!