kalielkslayer
Member
- Joined
- Feb 6, 2021
- Messages
- 930
In a 7mm RM.
I have a pet load with the 160 grain Accubond, 209 of them left plus about 40 rounds loaded.
That said, on an impulse buy, I bought 100 of these. When I couldn’t find the 160s, I got it into my head to buy these, if available. It worked out the other way around.
I searched Loaddata.com and found data for the 168 grain Berger. I’ll use that, starting a couple grains below max if I can’t find Nosler data.
But I’m sure some guys out there in THR land have pet loads with this bullet.
And I will start low and work up.
Off the top of my head I have RL22, RL23, RL25, IMR 4831 and IMR 4831 SC. I also have RL 19 and IMR 4350 and although they were included in the Berger data, I feel they are too fast. RL25 was the velocity winner in the Berger data, but my 160 grain load utilizes RL22.
I have a pet load with the 160 grain Accubond, 209 of them left plus about 40 rounds loaded.
That said, on an impulse buy, I bought 100 of these. When I couldn’t find the 160s, I got it into my head to buy these, if available. It worked out the other way around.
I searched Loaddata.com and found data for the 168 grain Berger. I’ll use that, starting a couple grains below max if I can’t find Nosler data.
But I’m sure some guys out there in THR land have pet loads with this bullet.
And I will start low and work up.
Off the top of my head I have RL22, RL23, RL25, IMR 4831 and IMR 4831 SC. I also have RL 19 and IMR 4350 and although they were included in the Berger data, I feel they are too fast. RL25 was the velocity winner in the Berger data, but my 160 grain load utilizes RL22.