Looking for load data for 9mm, 100 grain FMJ with WSF

[Shinbone]

Hello. I've searched quite a bit unsuccessfully and so I'm looking for load data for the Hornady 100 grain FMJ (#35527B) for use with WSF.
Thanks.

 

[Blue68f100]

Hodgdon's has the 100gr and WSF listed, different bullet but will get you to a starting point.

https://hodgdonreloading.com/rldc/

Bullet: 100 GR. SFI RHFP

Diameter: 0.355"

Case: Winchester

Primer: CCI 500, Small Pistol

Starting Load

Maximum Load

Availability

Manufacturer

Powder

C.O.L.

Grs.

Vel. (ft/s)

Pressure

Grs.

Vel. (ft/s)

Pressure

Winchester

WSF

1.140"

5.2

1,200

28,400 PSI

5.8

1,244

32,300 PSI

 

[FROGO207]

In the future when looking for load data and you can't find the exact load, you use the data for the next weight heavier bullet with the same general characteristics. Ie both jacketed, both hollow point etc. Use the starting load and work up. You can go a small amount over max and still be safe if you have a crony and don't go over max velocity listed.

 

[N555]

I have a wsl load for 115gr 9mm with a start load of 4.2 and max of 4.6gr.
My Hornady manual shows a coal of 1.085 for their 100gr FMJ.