Made my own gun grease, haven't tested yet but definitely will only work for non-heat/chamber

daniel craig

Member
Joined
Dec 23, 2009
Messages
2,815
So, this is not intended for high heat applications like the the chamber on a semi-auto.

This IS intended for applications like pistol slides, shotgun firearms, bolt gun bolts, etc.

I HAVE NOT tested it yet on guns. It works very well for reloading applications and other things around my apartment.

Ingredients:

1 cup Ballistol
2 ounces beeswax, cleaned and filtered (no sediment).
- Adjust based on desired batch size. PXL_20230416_155053735.jpg PXL_20230416_155109747.jpg
 
Last edited:
So, this is not intended for high heat applications like the the chamber on a semi-auto.

This IS intended for applications like pistol slides, shotgun firearms, bolt gun bolts, etc.

I HAVE NOT tested it yet on guns. It works very well for reloading applications and other things around my apartment.

Ingredients:

1 cup Ballistol
2 ounces beeswax, cleaned and filtered (no sediment).
- Adjust based on desired batch size.

Why? With all of the affordable, high quality lubricants available (even during "shortages"), why would you make your own? Especially considering you had to buy Ballistol, which is, in and of itself, a stand alone lubricant. I mean, 80% of your own recipe is made from professionally refined lubricant. What benefit have you realized by diluting it with beeswax?
 
Why? With all of the affordable, high quality lubricants available (even during "shortages"), why would you make your own? Especially considering you had to buy Ballistol, which is, in and of itself, a stand alone lubricant. I mean, 80% of your own recipe is made from professionally refined lubricant. What benefit have you realized by diluting it with beeswax?
Cause now its in grease form!:D
 
I HAVE NOT tested it yet on guns.

Pet peeve trigger.
I don't want to hear about a new gun, grease, screwdriver, whatthehellelse until it has been used.

Mineral oil is a good substitute for Ballistol.

Could that be because mineral oil is the main ingredient of Ballistol?
From MSDS:
"Ballistol is based on medicinal grade white mineral oil, (CAS # 8042-47-5)"
 
Why? With all of the affordable, high quality lubricants available (even during "shortages"), why would you make your own? Especially considering you had to buy Ballistol, which is, in and of itself, a stand alone lubricant. I mean, 80% of your own recipe is made from professionally refined lubricant. What benefit have you realized by diluting it with beeswax?
Because it's what I had on hand so I didn't have to go to the store or spend any more money. I added the wax to make the oil a little bit thicker so that it stays on the things I needed on. Also because I wanted to. I did this with mineral oil for treating some of the wood projects I do so I figured why not try it with Ballistol as well since it's essentially the same thing.
 
Pet peeve trigger.
I don't want to hear about a new gun, grease, screwdriver, whatthehellelse until it has been used.



Could that be because mineral oil is the main ingredient of Ballistol?
From MSDS:
"Ballistol is based on medicinal grade white mineral oil, (CAS # 8042-47-5)"
Yes it's not just mineral oil though according to the bottle it also has "proprietary petroleum distillates"
 
The OP seems to be happy with his grease and good for them. With all of the different products on the market I just don’t see the advantage of making my own grease.
 
Why? With all of the affordable, high quality lubricants available (even during "shortages"), why would you make your own? Especially considering you had to buy Ballistol, which is, in and of itself, a stand alone lubricant. I mean, 80% of your own recipe is made from professionally refined lubricant. What benefit have you realized by diluting it with beeswax?

I know, I know. In many human hearts is this desire for discovery, for self independence. Might make a good bullet lube, but there are better industrial greases out there.

Worth reading

EM 1110-2-1424 Lubricants and Hydraulic Fluids
 
On the few applications in which I use grease on firearms, I've been using Superlube. Not as sticky as the grease I used to use, which was whatever happened to be in my grease gun.
 
If one has never used grease then you have never owned Garands and M14 type weapons. They need grease so that would be a good use for it. I just use Rig and the jar I bought will last forever.
 
Back
Top