Sody82
Member
- Joined
- Mar 6, 2019
- Messages
- 111
Ok so i took some 243 and 308 brass and cut em down to 1.18" necked them with 41 mag seating die to the depth they need to headspace. I used 410 sp wads 5gr green dot and filled the shot cup with hornady bbs. I put a cap on them made from primer box cut with a 10mm case in a drill. They work pretty nice at 10 yards. I made a case measuring jig for cutting them down. Id like to come up with a crimping system. Any ideas?