Sigs will do the job with less break-in
...
Especially when we're talking DA/SA pulls out of the box and how the DA smoothness gets far better per 1k rounds, or a simple Wolff main spring pkg and replacing a 24lb main spring with a 20, 19, 18, 17, 16lb main. I found the Wolff 17lb main spring to be pure heaven and, with it, thru some 4000 rounds with no light strikes. Using a Sig Armorer DVD, they show you how to do it yourself, among many other things.. Great informative instructions to do it, and other things on your Sig gun/s, yourself.
Sigs CS, of late, is top notch IMO, as having ordered return springs for all 3 of my P229's, 9mm and 40cal, and when I received only the 9mm spring kit, and not the 2 40cal spring kits, I made a call of inquiry as to why, being told at the time of the order, all was in stock.
The nice young lady chked on your PC of stock and came back to tell me that they only had the return springs in stock, some 840, but not the rest of the springs that make up the spring sets. I told her I really only needed the return springs, as both my 40cals I bought used, and I had put 3000 rounds out each and it was near time to change them.
She said, "ok Mr. Ls, I'm sending you 2 return springs today, no charge, and well send the others when they come into stock. Is there anything else we can help you out with..?"
I said no, but thank you for your kindness and concern, and sure enough, 4 days later, I got the 2 free return springs in the mail. And 1 week later I got both the spring kits with return springs included.. which I did pay for.
Some people say Sigs CS is not as good as CZ's, but I have to believe that their bad experiences starts at their end, chewing the CS reps ear off from the get go, and quite frankly, I can understand how these types get put on the back-burner, and pay the price, in terms of time it takes to process their needs (pissed-off, in your face, "demands").
People skills is all it takes to get good, fast, service, and it works both ways.
IF you go with the Sig, you will not be sorry.
If you go with the CZ, I doubt you will be too disappointed, IF at all..
Both are top notch guns, with the trigger edge going to Sigs, IMHO, having looked at the CZ's prior to buying my Sigs, and it was in the triggers and total finish, plus the grip and weight difference, that won it for the lighter Sigs.
Accuracy is there, make no mistakes about that, for either gun out of the box.
P229/40 ~ P220/45 ~ P229R CT 9mm All 3 have a combined, flawless, 100%, 10k rounds thru them..
My other, back-up P229/40, which is not shown, has 3400, flawless, rounds thru it, by me, as well, which I estimated already had aprox 800 rounds thru it by its previous owner.
Luck,
Ls