silicosys4
Member
- Joined
- Jun 29, 2012
- Messages
- 3,729
I have an antique 1873 Winchester rifle in 32wcf.
I have .313 cast 95gr rnfp lead projectiles
I have a good selection of powders
Some of these powders I have a lot of experience with, some of them I have no experience with, and I have no experience loading 32-20. Load data for 32-20 is very sparse and limited.
I would like something that sends a 95gr cast lead projectile out of a 20" barrel at 1200fps while being safe on an antique 1873.
The only loads or load data I have is the box of reloads I found to function test and sight in the gun, which was 9.9 gr. of IMR 4227 under a 98gr RNFP cast lead projectile. This was loaded by somebody else and is the only data I have that is close to what I have, but I have no idea how safe that load is for the gun.
I have .313 cast 95gr rnfp lead projectiles
I have a good selection of powders
Some of these powders I have a lot of experience with, some of them I have no experience with, and I have no experience loading 32-20. Load data for 32-20 is very sparse and limited.
I would like something that sends a 95gr cast lead projectile out of a 20" barrel at 1200fps while being safe on an antique 1873.
The only loads or load data I have is the box of reloads I found to function test and sight in the gun, which was 9.9 gr. of IMR 4227 under a 98gr RNFP cast lead projectile. This was loaded by somebody else and is the only data I have that is close to what I have, but I have no idea how safe that load is for the gun.