Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Just bought a S&W 329pd and the trigger will randomly not reset fully. It needs a slight nudge with the trigger finger to get it forward. Any thoughts? It has only 100 rounds through it.
If like other N frames, there should be an overtravel pin inside the spring of the rebound slide.
Saw one old 29 like new due to this. Same problem.
The cut to length side of the pin was to the outer edge of the slide and it had a burr. Simple grind of bevel on edge solved it.
Could have flipped the pin, but the next poor slob that ever took it apart could have put it back in the "wrong way" and had the problem again.
Slight bevel (barely there) and the pin length was unchanged, and orientation no longer mattered (the untouched end had a radius from the factory).
Yea, a call is going to Smith and I'm having them take a look at it. I was starting to open it up and see if I can fix it, but then thought why am I doing this? Last thing I want to do is void my warranty on the new gun.
I know you said you soaked it but I would take the grips off and blast the inside of the liberally with Gun Scrubber, reoil and go shoot it some more, say 100 - 150 rounds. Sometimes little gremlins go away with shooting.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.