Spooky Dan
Member
- Joined
- Mar 20, 2014
- Messages
- 23
Hey guy, first post here. Wanted to get the community's feedback on project I have been working on for my PS90. Most PS90 owners including myself don't like all that awkward barrel sticking out of the gun and there really aren't many options for rails and shrouds that help break up the look. And the ones that are out there mount to the barrel which isn't optimal because the barrel moves...
I came up with a design that utilizes existing mounting points on the gun (not the barrel). I used a thumb screw on the bottom to keep field stripping fast/easy. The rails are all off the shelf Magpul parts.
The design not only covers up the barrel and adds rails, it also adds a forward grip position.
The part itself is an SLS 3D print. A quality industrial print, not that desktop cheap crap that is all the rage these days. It is a black nylon (data sheet).
I really just made this for myself but if there is interest I may be able to be swayed to have a bunch made.
Check it out and lemme know what you think.
I came up with a design that utilizes existing mounting points on the gun (not the barrel). I used a thumb screw on the bottom to keep field stripping fast/easy. The rails are all off the shelf Magpul parts.
The design not only covers up the barrel and adds rails, it also adds a forward grip position.
The part itself is an SLS 3D print. A quality industrial print, not that desktop cheap crap that is all the rage these days. It is a black nylon (data sheet).
I really just made this for myself but if there is interest I may be able to be swayed to have a bunch made.
Check it out and lemme know what you think.