SSG Scott
Member
I own an AR-15 with an Aimpoint CompM3 and have recently purchased an EoTech XPS2 with the intention of putting the XPS2 on my PTR-91. I understand that an ACOG would have undoubtedly been the best choice for the PTR-91, but it wasn't in my budget and won't be for a while (Unless someone reading this thread if feeling charitable and has an ACOG with the .308 ballistic reticle they are willing to give away ).
The Aimpoint on the AR-15 is good for engagements from Close Quarters out to 300 meters when using M885 Ball and zeroed at 25 meters, so I theorize that a CCO on the PTR-91 should be just as effective between those ranges, if not better. I primarily shoot 149 Grain FMJ, and my PTR-91 has an 18 inch barrel and 1:12 twist I believe.
That being said, here is what I am looking for opinions on:
1. EoTech or Aimpoint on the PTR-91 and why?
2. With the PTR-91 and CCO, if my POI is 2 to 2.5 inches below my POA at 25 meters, at what range(s) will my POA/POI be the same?
Thanks!
The Aimpoint on the AR-15 is good for engagements from Close Quarters out to 300 meters when using M885 Ball and zeroed at 25 meters, so I theorize that a CCO on the PTR-91 should be just as effective between those ranges, if not better. I primarily shoot 149 Grain FMJ, and my PTR-91 has an 18 inch barrel and 1:12 twist I believe.
That being said, here is what I am looking for opinions on:
1. EoTech or Aimpoint on the PTR-91 and why?
2. With the PTR-91 and CCO, if my POI is 2 to 2.5 inches below my POA at 25 meters, at what range(s) will my POA/POI be the same?
Thanks!