Sacrilegious to shorten a Ruger Old Army?

Status
Not open for further replies.
T

Tallbald

Member
Joined
Jan 29, 2009
Messages
870
Location
Southern KY
OK. I have three beautiful ROAs, all stainless adjustable sight 7.5 inch models. Really would love to have a shorter barrel version, but as most who follow pricing know, the shorter barrel fixed sight versions are considerably higher priced. Given there are so many of my version ROAs out there, or another could be bought for $425 or so, would it be a gun sin to bob the barrel/lever/etc on a garden variety ROA to make the short one I'd like to have? I guess I'm looking for support. Don
 
Tallbald said:
OK. I have three beautiful ROAs, all stainless adjustable sight 7.5 inch models. Really would love to have a shorter barrel version, but as most who follow pricing know, the shorter barrel fixed sight versions are considerably higher priced. Given there are so many of my version ROAs out there, or another could be bought for $425 or so, would it be a gun sin to bob the barrel/lever/etc on a garden variety ROA to make the short one I'd like to have? I guess I'm looking for support. Don
Click to expand...
Absolutely no sin involved. It's your gun. Fix it up anyway you want to, and enjoy it.
 
It's your gun to do as you wish with it. IMHO, very little in the gun world is sacred and I have no issue with making one my own in any way I see fit. The collectors and purists can find their own.
 
Tallbald

What I would do is buy a barrel and loading lever and cut them down to whatever length you desire and then just swap them out. That way you could always convert it back to the way it came from the factory and everything would be original. That's just me. Guess I'm a strange one though.
Anyway good luck with your project. Looking forward to seeing the results.
 
That way you could always convert it back to the way it came from the factory and everything would be original.
Click to expand...
This is false economy. You'll spend way more that way, on both ends, than you'll ever make back selling it as factory original.
 
Any decent custom work on a BP revolver is worth it as not many customs survived to this day.
The ROA is probablly the coolest of the lot as it is the best made BP revolver ever!
I say do the deed and enjoy it!
ZVP
 
I say, go for it. If I find another ROA for a decent price, I'm gonna chop it into a snub.

Prairie Dawg, I like your ROA snub. Please elaborate on the grips, cylinder pin, and filler pin.
 
Gripframe was custom cut by the machinist who cut the barrel.
Grips were made by Tru-ivory.
Cylinder pin is by Belt Mountain.
Filler pin was designed by the machinist who did the gun. If you look closely, you will see two little pins sticking out the back.
The idea was that you can turn the cylinder pin screw with these -- a built-in screwdriver.
In reality, it falls out when I shoot the gun, so I mostly leave it out nowadays.
That's an R & D conversion cylinder in 45 Colt.
The front sight is a silver coin, but the machinist was too zealous in his finishing work and buffed out all the coin features.
The holster is by Kirkpatrick Leather.
Very cool little gun.

Course, I have the opposite too:
Custom work by Rowdy Yates......

ROAs.jpg


Too Much Fun!
--Dawg
 
Prairie Dawg - you have literally covered the long and the short of it.
 
You all are a great and supportive inspiration to me. I guess maybe some of you have experienced the same concerns I have about radically altering a gun that is out of production. I remember though the first time I decided to trim the grip frame on a Single Six of mine, and to drill and tap for lanyard rings on my SBH, BH and two of my ROAs. I remember thinking "these are mine and I'll do as I want!". Kind of a good feeling to tell myself that. Don.
 
P. Dawg,

Great oogly moogleys! All of Ned's heros would be jealous of them long tall ROAs!

Do the SASS folks make you take a handy cap for having the muzzle so much closer to the targets than anyone else? ;-)

-kBob
 
Actually kBob I made them myself from a stainless steel bolt on my little metal bench lathe. I thread them 5/16-24 and drill/tap the butt of the frame, or sometimes drill and cross-pin them into a drilled corresponding hole in the butt of the grip. The ring part is a nickel plated d-ring opened up slightly, then closed into a cross drilled hole in the lanyard stud. You can see one example at post number 75 on the Ruger Old Army club thread on this forum. Don.
 
The only thing that i can think of as bein sacriligeopus about ROA's is not ownin one, er two, er three, er..........

+1 on P-dawgs Avenger, That thing is so sweet i think i git a cavity every tme i look at it.
 
I do what I want with my own guns. Some people don't like what I do, but their opinions don't affect me. For example, I did something "sacrilegious" to the rosewood grips on my mint, and newly purchased, Ruger Old Army. But they look better to me now, and that's all that really matters.
 
Status
Not open for further replies.

Similar threads

J-Bar
  • Locked
Question about holster for Ruger Old Army
Replies
11
Views
2K
4v50 Gary
4v50 Gary
G
  • Locked
Ruger Old Army.........Where to find one????
Replies
4
Views
594
Titanvk56
T
T
  • Locked
To have or to hold ROA (shoot or not). Quandry.
Replies
4
Views
418
J-Bar
J-Bar
B
  • Locked
Ruger Old Army and a really good morning
Replies
9
Views
655
Starter52
S
D
  • Locked
Ruger Old Army worth
Replies
8
Views
704
Davis1613
D
Back
Top