DilboFlaggins
Member
So last weekend out of boredom I chopped and dropped my .410 nef pardner. I shot it this weekend, it takes out milk jugs at surprisingly farther range than I expected. At about 40ft it was still lethal to anything milk jug sized.
I used a metal cutting jigsaw blade, I warped the end in leather so id have something to hold. I had a few very small jewelers files, some large grit sandpaper. I sprayed the crown with black spray paint to keep off rust (after degreaseing of course), ill re-blue it next time i get paid. I also fashioned a brass butt plate to hide the sock bolt, using some tin snips and lots of filing, and a hammer and nail to punch the screw holes.
As you may can tell I had quite some fun, doing what i could with the limited tools i had.
Id also like to take this time to state, that the barrel is greater than 18.5 in long and the overall is greater than 27in
I used a metal cutting jigsaw blade, I warped the end in leather so id have something to hold. I had a few very small jewelers files, some large grit sandpaper. I sprayed the crown with black spray paint to keep off rust (after degreaseing of course), ill re-blue it next time i get paid. I also fashioned a brass butt plate to hide the sock bolt, using some tin snips and lots of filing, and a hammer and nail to punch the screw holes.
As you may can tell I had quite some fun, doing what i could with the limited tools i had.
Id also like to take this time to state, that the barrel is greater than 18.5 in long and the overall is greater than 27in