Took the 500ATP out to the range again today. Ran the customary 25 nrds of birdshot through it. Practiced correct mount,stance,lean forward etc. Was almost through the box when the gun choked and wouldn't release a fired round.I hit the slide release and finished up the box by hitting the slide realease after every shot.
On my way back home I stopped at a hardware store, opened the case in the trunk of my car and pulled the trigger assembly free. In the store I dug around until I found the right diamter roll pins. I pulled the solid &loose) pins from the hammer and tapped in the roll pins. Using the ever handy dremel I trimmed the pins flush with the hammer. Stuck gun back together,dryfired it a dozen times. Pulled assembly back out,no sign of bending or damage to the pins.Put gun back together....
Hopefully it's fixed, and hopefully I'll get used to the shotgun enough to use it without hesitation, everything isn't automatic yet,but I keep hoping. Oh yeah,the cheapy light/laser still works .
TWBryan
On my way back home I stopped at a hardware store, opened the case in the trunk of my car and pulled the trigger assembly free. In the store I dug around until I found the right diamter roll pins. I pulled the solid &loose) pins from the hammer and tapped in the roll pins. Using the ever handy dremel I trimmed the pins flush with the hammer. Stuck gun back together,dryfired it a dozen times. Pulled assembly back out,no sign of bending or damage to the pins.Put gun back together....
Hopefully it's fixed, and hopefully I'll get used to the shotgun enough to use it without hesitation, everything isn't automatic yet,but I keep hoping. Oh yeah,the cheapy light/laser still works .
TWBryan