Matt Almeda
Member
Howdy Pardners!
This was our latest build up....what do you think?
The barrel was shortened down 2 inches from 7.5 to 5.5.
The ejector rod and shroud shortened.
Muzzle has an 11 degree target crown.
Barrel was milled for a Weigand interchangable front sight.
Backstrap has 20 lpi checkering.
All of the pivot pins and center pin was polished.
Trigger was set to three pounds and then the hammer and trigger were polished.
Re-sprung with reduced springs on the trigger and mainspring
Glass bead blast finish.
Have a great day!