Trim It case trimmer

[cfullgraf]

I just saw an ad for the Trim-It case trimmer in May, 2014, "Rifle" magazine.

Similar in concept as the WFT trimmer but allows for different inserts to trim different cases and has a micrometer adjuster for adjusting trim length.

The advertisement says it will trim straight walled cases as well as bottle neck cases. The web site apparently has not been up dated for that.

For those interested, check it out here.

http://www.eztrimit.com

 

[KansasSasquatch]

Sounds similar to the WFT-2, just fancier with the micrometer adjustment. Also more expensive than the WFT-2. But I don't know if they have straight wall chambers for the WFT-2.

 

[longhill]

I had one specially made up in 5.7x28, works well.
Conversion are cheap enough.
Enough to have one made in 7.62x54R, still waiting delivery.
They are hard on the fingers if you do a lot of brass.
I need to find a used Lee Auto Primer, for holding the case into the trimmer.

 

[Walkalong]

Nice.

 

[Potatohead]

The WFT is pretty jerky on my fingers/wrist. So if it's like the WFT, beware. Works really well though and fast too. (again, if it's anything like the WFT)

 

[2 Horse]

The WFT is pretty jerky on my fingers/wrist. So if it's like the WFT, beware. Works really well though and fast too. (again, if it's anything like the WFT)

Speed is your friend. Drill should be on high, pull the trigger, then insert the case, let the tool do the work. Don't force it. I can do a 1000 in about 35 or 40 min.

 

[trigga]

looks cool. worth a try

 

[grubbylabs]

If I did not already have a WFT for 223 and 308 I would look into it. But as it is I really like my WFT's.

Speed is king with these...