Varmint Rifle

Status
Not open for further replies.
Would there be a problem if say in the future my barrel got burned out, could I rechamber an XR-100 in 22-250 to .243 winchester?
 
I have owned nice varmint rigs in several calibers, and several manufacturers. The price of the Remington 700 SPS varmint rifle at $495 to $515.00 is hard to beat. My 700 SPS varmint will hold beautiful groups in the range of 0.25" at 100 yards with factory ammunition.

.223 Rem (zero at 300 yards)
 
I have a Win M70 .22-250 varmint that is by far the most accurate gun I own, loves the .40 grain v-max stuff. That said if I had it to do over again I'd have a .223.
 
24upper.gif

Bushmaster lower with match trigger, DPMS 24" Bull Barrel (1:9 twist), Harris Bipod, Cheap scope (saving for the real deal).
 
Would there be a problem if say in the future my barrel got burned out, could I rechamber an XR-100 in 22-250 to .243 winchester?

Can't rechamber a 22 to 243. You could rebarrel a Savage yourself in about 30 minutes though.
 
My uncle has a Rem. rifle (dont know what model) in 222 Rem. Mag. It is very accurate. Works great on ground hogs.
 
I agree with most who recommended the 223. The 1 in 12 inch twist will not be an issue for you if you are content to shoot 60 grain or less weight bullets. I shoot 55 grain Vmax bullets in my 12 twist CZ.

Between the rifles you have listed, I would look favorably on the Savage. I have yet to see one that won't shoot really good. You didn't mention the CZ, but like another contributor suggested, it would be worth looking at one. I have the Lux version in 223, and couldn't be happier... it is the perfect walking varmit rifle. Another option is the Savage 25. This is a really slick little rifle for the 223 or 204 Ruger family of cartridges.

Lastly I would encourage you to shy away from the heavier barrels... they just add weight. A properly manufactured barrel of a medium cross section will shoot just as good and you won't have to carry the additional weight. I know it is hard without having optics mounted on a rifle to really shake one out in the store, but which one fits your frame the best? A rifle that doesn't fit right won't be much fun to shoot for very long.
 
Anyone answer the question 5 posts above please? Or offer any insight on the XR?

Don't see why it couldn't be done... if the action will handle a .22-250 it should handle a .243. But it would be a bit pricy.

I'm currently breaking in a fellows XR-100 in .204 Ruger. It has Leupold VX-III 4.5-14x glass. First session last Saturday at 100 yds, 3-shot groups:
- Hornady 32gr V-Max, .342
- Hornady 40gr V-Max, .364
- Federal Premium 39gr Sierra BK, .502
- Winchester 32gr SilverTip, didn't even measure the group but it was close to 2 inches

I've said since the .204s inception that, "There's a cartridge nobody needed." But I turned 180 deg. on Saturday. I LIKE this little round. The ballistics are almost identical to a .22-250 w/40gr bullets... it's just a smaller package.

And the XR-100 is a fine rifle. But I'm a long-time fan of the 700 action... and a Leupold bigot.
 
If you look at the cartridge head size of the .22-250 and .243 they are the same , to rebarrel a 700 in .22-250 to .243 should not require a new bolt. Both are short action cartridges as well.
 
Awwww, just skip the hoopla and buy a .25-06. You haven't seen varmint destruction until you've nailed 'em with a featherweight bullet fired from a full power rifle cartridge :evil:

75 grain Sierra HP's at 3690 FPS will throw a praire dog in excess of 20 feet at pretty respectable ranges.
 
So what would I need to rechamber a 22-250 to a .243 if I don't need a new bolt? Would I simply just need to screw on a new barrel?
 
So what would I need to rechamber a 22-250 to a .243 if I don't need a new bolt? Would I simply just need to screw on a new barrel?

Yeah you could rebarrel to a .243 later , but with a Remington that requires a riflesmith for the vast majority of us. For the do it yourself barrel changes the Savage is far easier.

Most match barrel installs include chambering , cut to length , crowning , intallation and headspace of the new barrel and some degree of action truing as well. As just one example, Hart rifle barrels charges $600 for a match barrel install on a 700.

I would just get the $650 .243 VLS to begin with if I wanted a .243 .

A 700 SPS Varmint .223 is one I have that is quite accurate. Also consider the .223 SPS Tactical 20" wit the 1 in 9". I have a .223 20 " 700 LTR 1 in 9" twist and it is the most accurate rifle I have ever owned. The SPS Tactical is similar but without barrle flutes and a Hogue stock.

A Savage 12FV or 700 SPS Varmint both have plastic stocks but something like a $200 Bell & Carlson Medalist stock makes a nice upgrade.
 
Agree with MachIV. Get yourself a Ruger #1 in 25-06. You can shoot anything from 75 to 120 grain bullets. Good for woodchucks to deer.

But since you asked about 22-250 and .243, get the .243. It will be a more useful caliber and should be a little cheaper in the long run. MHO
 
I have the 7.62x39 CZ 527 carbine. It's light, floating barrel, double set trigger, and 1:9 twist. I put a small Bushnell scope and use a Harris bipod. I think what I like most about it is it's easy to carry and small enough not to get hung up in "stuff". The disadvantage is it has a pretty good kick to it, but I figure if I miss the first shot it's one lucky ground hog.
 
Rebarrel.

Hey there;
I understand your question and see you have been answered. rechambering and rebarreling are two different things. To rechamber a burned out barrel new twist is needed. Not much of that going on anymore when new barrels can be had much cheaper.
I for one , do not believe you will be burning out a barrel any time soon.
If you are replacing barrels on a less expensive rifle, you may be able to buy a new rifle cheaper or very near the cost of rebarreling.
nothing wrong with having two guns. This subject comes up a lot on here. Some shooters will go thru barrels 10 to one of the normal shooter / hunter.
Don't count rounds. Just shoot. when the need comes you will be the first to know. I would not buy a rifle in the $500.00 to 700.00 class and be worried about what barrel was going on it next. Just hunt with it or shoot it. As I said , burned out barrels are common to some shooters and they plan for that. Not many hunters need to be very concerned about it.
 
Status
Not open for further replies.