What do I need to reload 7mm mag ?

[humpiedog]

I have a lee 4 hole turrent press . what do I need to get the press set up to reload 7mm rem mag ? I normally use 140 or 150 grain bullets .

 

[MtnCreek]

Check your owner's manual. I think the press can seat primers, but I'm not 100% on that.

Must Have:
Full length sizer and seating dies.
Case Lube.
Beam or Digital scale accurate to 1/10 grain.
Tool for trimming case length (Lee make a cheap but effective tool. Several options here).
Large Rifle or Large Rifle Magnum Primers.
Powder suitable for 7mm Rem Mag / 140 to 150 grain bullets.
Bullets.

Really Need:
Calipers (you could use a ruler or scale, but calipers are almost a must have).
Tool for measuring cartridge case from shoulder to head (Hornady makes a good tool that works with a caliper).

Would Be Nice:
A powder measure and trickler or something like the RCBS Chargemaster (Buy 2 and I'll PM my address for the second one ).

 

[oneounceload]

Full length sizer and seating dies.

DEPENDS....I use a neck sizer because I use one gun in 7mag and it is a bolt action........I can get .625" 3 shot groups at 100, 1" at 200 neck sizing - that is good enough for minute of elk or deer

 

[howlnmad]

What is your reloading background? By the way your post is worded, I would suggest a good manual or two.

 

[plmitch]

What is your reloading background? By the way your post is worded, I would suggest a good manual or two.

I'll second that.