dobedo
Member
Just received some LRPs and LRMPs, just call me a hoarder I buy them when I see them.
What have you done in the reloading room today
- Thread starter horsemen61
- Start date
Soonerpesek
Member
Where did you "see" those 200's @.......................??
irishlad
Contributing Member
I recently got this one. I like the fact it had a "T" piece for the ram.
RCBS Rock Chucker Supreme and RC IV Primer Catcher w/ Hose *GREEN*
Included: Green RCBS Primer Catcher Cover for primer front *magnetic* 2 foot hose Features: Perfect fit on the RCBS Rock Chucker Supreme and RC IV. Tight tolerances to help prevent movement of catcher. No more mess with spent primers everyone on your bench. Can be printed in any color on the...
elite3ddesign.com
Armorer 101
Member
Made up a few more 24 Varmint rounds with 80 grain promos to fire form for the AR.
I didn't know Lee shot loaders were fetching such large sums. But nothing surprises me these days. When I shot Trap, I reloaded single stage with an RCBS 12 ga die set. I still have it. It was not fast, but enjoyable for me, as well as accurate.
Mark_Mark
Member
- Joined
- Jan 9, 2021
- Messages
- 18,171
they are selling for $40-$70. I found a 10Gauge with the Lee mini priming tool Delux! Super COOL
AJC1
Member
I need to swap you something for those if your no longer using them. Junior loves shooting shotgun.
Thanks, but I would like to keep the RCBS 12 ga die kit. I do not use them now, but I can see me using them in the future, and who knows if I would be able to get them again. Probably, but you never know.
I recently got this one. I like the fact it had a "T" piece for the ram.
RCBS Rock Chucker Supreme and RC IV Primer Catcher w/ Hose *GREEN*
Included: Green RCBS Primer Catcher Cover for primer front *magnetic* 2 foot hose Features: Perfect fit on the RCBS Rock Chucker Supreme and RC IV. Tight tolerances to help prevent movement of catcher. No more mess with spent primers everyone on your bench. Can be printed in any color on the...
Many thanks! I will definitely consider this. Looks like something I would like using. I just got a new Primer Tray for my Rock Chucker about 10 days ago direct from RCBS because I had lost the retainer clip on the original, and RCBS does not sell just the retainer clips, so I bought the whole tray with retainer. But it was very inexpensive, so no big deal if I never use it again.
It's Derby Day, so I have the Derby Coverage on in the background. I used to be quite the Horseplayer in years past. Not so much these days. I did OK, but I used to say, "If My Horses Had Bigger Noses, I'd Be A Millionaire." So true. I lost "By A Nose" more times than I could count.
You better check again. I'm talking about the ones you use a mallet with . 17 Completed auctions for 410 with an average price of $183 13 Completed for 10 gauge averaged $198 only 2 28 ga with average price of $165
Mark_Mark
Member
- Joined
- Jan 9, 2021
- Messages
- 18,171
I paid $30 for my Lee 10 gauge whacker set deluxe with the Lee mini primer
Derby over, so I am heading out to the bench to relaod some 9mm. 115 gr JHP with W231. In prep for a 9mm plinking rifle I plan on getting very soon. I still have a bunch of 9mm ammo components that will give me many hours of plinking fun.
Speaking of that;
Yesterday afternoon I was at a large outdoor store that had a gun department, I decided to see if they had the Hi-Point 9mm rifle that I want for plinking. They did have one. At the normal low-cost price. I decided I might as well get it while I was there and they were not busy. I told the sales guy (young... 21 ish) that I'd like to buy it. He said....
"You are going to have to come back tomorrow. I have to put stock up on the shelves and I am closing down the gun department for the day."
I was shocked. This was around 1:30 PM on a Friday, and he makes the decision to close the gun department for the day with a confirmed buyer standing at the counter? A sign of the times I guess. This place is about 45 minutes away from my home, so 90 minutes round trip. I did not go back today. My local gun shop can order that rifle for me if he does not have one in stock.
Speaking of that;
Yesterday afternoon I was at a large outdoor store that had a gun department, I decided to see if they had the Hi-Point 9mm rifle that I want for plinking. They did have one. At the normal low-cost price. I decided I might as well get it while I was there and they were not busy. I told the sales guy (young... 21 ish) that I'd like to buy it. He said....
"You are going to have to come back tomorrow. I have to put stock up on the shelves and I am closing down the gun department for the day."
I was shocked. This was around 1:30 PM on a Friday, and he makes the decision to close the gun department for the day with a confirmed buyer standing at the counter? A sign of the times I guess. This place is about 45 minutes away from my home, so 90 minutes round trip. I did not go back today. My local gun shop can order that rifle for me if he does not have one in stock.
I have them in every gauge. Extras in 12 and 20 I don't think I gave over $10 for any of them. Most I paid $5 or less. . People have gone crazy on eBay for 10 gauge and 410 with many going for over $200
Nothing in my reloading room, but was over at my son's house today and helped him dial in a proper crimp on his .357 mag carts.
He has all Lee gear. Frankly, I wasn't overly impressed. Also gave him a flat of magnum primers since he was out.
He has all Lee gear. Frankly, I wasn't overly impressed. Also gave him a flat of magnum primers since he was out.
Today I cast testboolits at 20:1 using indoor pellets, .22lr bullets, and FMJ lead separately. I cast this alloy combination for 38-125 hp, 38-150hp, .357-125hp, 9-125hp, 40-160hp, and 45-200hp. I've already cast 40:1 and 30:1 testboolits.
Dane R. Marley
Member
I reloaded 100 45 Colt rounds with 6.0 Red Dot under 250 gr powder coated bullet. I did 50 rounds several days ago and another 50 rounds this morning. I loaded these on my Redding T7 Press. I may purchase a conversion kit and start loading them on my 750.
Attachments
Last edited:
dobedo
Member
That is a good question.
I do the same thing. This is the reason that we seldom have to pay panic prices on components! Call me a hoarder if ya want..............!
Being retired, its been fairly easy for me to stay caught up in the loading room. So some of what I post is a stretch, but here goes! But I was in the loading room! 
I unpackaged, weighed and stamped permanent letters (P) on the Pewter that I recently bought. A whole bunch of ingots weighing about an oz each! And cleaned and stored away the .356 Star Bullet Sizing Die that I also recently bought. Both arrived in the mail on Friday.
I unpackaged, weighed and stamped permanent letters (P) on the Pewter that I recently bought. A whole bunch of ingots weighing about an oz each! And cleaned and stored away the .356 Star Bullet Sizing Die that I also recently bought. Both arrived in the mail on Friday.
AJC1
Member
Just finished and cleaning up. 165 grain 7.7 bullets. They drop .316 I size to .313
GeoDudeFlorida
Member
- Joined
- Dec 1, 2020
- Messages
- 11,263
I went to the indoor range to conduct more SyA SPP testing - that’s my story and I’m sticking with it 
- 100 9mm and 75 .38Spl. 100% bangage. 0% kaboomages.
At checkout I saw a bunch of Alliant powders - Unique, Bullseye, 2400 and Power Pistol. On a whim I asked for prices: $34.95 per pound. I bought one of each.
- 100 9mm and 75 .38Spl. 100% bangage. 0% kaboomages. At checkout I saw a bunch of Alliant powders - Unique, Bullseye, 2400 and Power Pistol. On a whim I asked for prices: $34.95 per pound. I bought one of each.
shoebox1.1
Member
Sweet!I went to the indoor range to conduct more SyA SPP testing - that’s my story and I’m sticking with it
At checkout I saw a bunch of Alliant powders - Unique, Bullseye, 2400 and Power Pistol. On a whim I asked for prices: $34.95 per pound. I bought one of each.
AJC1
Member
The I've used 2400 and power pistol. At that rate I'd take every bottle of 2400 on the shelf.... good in 357 and 6.5x55I went to the indoor range to conduct more SyA SPP testing - that’s my story and I’m sticking with it
At checkout I saw a bunch of Alliant powders - Unique, Bullseye, 2400 and Power Pistol. On a whim I asked for prices: $34.95 per pound. I bought one of each.
.45Coltguy
Member
Dang! I would buy two each[at least!] of 2400 and Unique at that price. And I don't even need 'em!I went to the indoor range to conduct more SyA SPP testing - that’s my story and I’m sticking with it
At checkout I saw a bunch of Alliant powders - Unique, Bullseye, 2400 and Power Pistol. On a whim I asked for prices: $34.95 per pound. I bought one of each.
Purchased a Savior brand soft gun case for my new KSG410. In the gunroom I opened the shipping boxes for disposal and found this printed on the inside. Nice touch, people.
(E2A: purchased from Midway, corrected typo)
(E2A: purchased from Midway, corrected typo)
Attachments
Last edited:
Similar threads
