Which Powder? 243 and 6.5x55

Status
Not open for further replies.

viking499

Member
Joined
Feb 9, 2007
Messages
3,824
I am trying to find some powders for the following loads. What recipes do you guys have or recommend?

243 - Hornady 65 grain v-max
243 - Hornady 70 grain
243 - Nosler 70 grain varmit
243 - Hornady 100 grain

6.5x55 - Hornady 129 grain
 
For lighter .243 bullets I've had good results with IMR 4985 and IMR 4320 for 100 grain. IMR 4985 would probably work well with both .243 and 6.5X55.
 
Rel-19 works very well in 6.5x55 as does Rel-22, IMR4350, H-4350 for starters. Basically any of the medium-slow burning powders work in 243 & 6.5x55. Check your local manuals. Specific loads from other people doesn't mean that it will shoot well in your own rifle. Look at Hodgden.com or Alliantpowder.com for recommended loads. They are both excellent and capable cartridges.

NCsmitty
 
I've had good accuracy with IMR-4064 in light bullets (60 gr Sierra's) and Imr-4350 and RE-19 with 100gr Hornady BTSP's in .243. Haven't loaded any Swede's yet but that may be my next rifle purchase( CZ-550).
 
Loaded for a 700 ADL .243 a few years ago that shot, both 70 gr Ballistic Tips & 75 gr V-Max very well (easy sub m.o.a. at 200 yds)with H 414.
 
I love H414 in my .243 too, from 55 grain BT's @ over 4000 fps to 70 grainers, 75's 80's 85's...... I do find a mag primer to greatly improve accuracy. H4350 is another great one in my experience using a very wide range of bullet weights too.
 
IMR4064 works very well in my .243 (Savage 1:9.25 twist) with the lighter bullets. Varget edges the 4064 out with 85gr and 100 gr bullets.
 
it all depends on your rifle... of course. I have used 42gr of nobel #0 (vectan tu7000 is the same). this is with hornady 100gr sp. (2450). i have also used viht N140 with lighter bullets. My rifle likes mid wieght bullets best 80-90gr.
 
Status
Not open for further replies.
Back
Top