Warners
Member
Hey guys....looking for some direction here. I was lucky enough to get an email alert from TJ Conevera's in time last night to place an order for 1,000 X-Treme 147 grain RN plated bullets. Since I'm almost out of my HP38 powder, I'm going to have to start loading with the only stuff I could find recently....Unique powder. So I'm looking for some load data for the X-Treme bullets with the Unique powder....oh, and throw in the fact that I ONLY have Magnum small primers left to load with. My current 9mm load has been the the Berry's 124gr HBRN-TP bullets, using the HP38 powder. This is the load I've been using:
9mm Luger: 4.5gr HP38, Berry 124gr HBRN-TP, 1.135” OAL
I found a suggested load for the Unique and 147gr Gold Dot bullets on the Alliant site, but I'm wondering what adjustment I should make for the magnum primers. Here's the load that I found:
4.3gr Unique, 147gr Gold Dot, 1.113" OAL
Any suggestions would be helpful,
Warner
9mm Luger: 4.5gr HP38, Berry 124gr HBRN-TP, 1.135” OAL
I found a suggested load for the Unique and 147gr Gold Dot bullets on the Alliant site, but I'm wondering what adjustment I should make for the magnum primers. Here's the load that I found:
4.3gr Unique, 147gr Gold Dot, 1.113" OAL
Any suggestions would be helpful,
Warner