Zero 240 grain bullets!

Status
Not open for further replies.

Lee Q. Loader

Member
Joined
Jan 30, 2018
Messages
444
I thought you all might be interested in seeing a 44 mag 240 grain JSP from Zero Bullets. I recovered this one by chance from a sandy hill side I was using as my back stop.
The mushroomed bullet weighed about 210 grains and measured .735 inches.
I shot it with a stout load of Alliant 2400 from my Redhawk. The load chrono's at 1350 fps. I was shooting about 20 yards.
I really like these bullets! I hope to take a deer with them soon and now I'm confident in their performance. 20220313_185848.jpg 20220313_185620.jpg
 
I always liked zero and used their bullets for many years before I started casting and Jake started selling bullets as good but cheaper. Used a lot of zero in 9 & 357 over the years, and my last trip to Alabama, I ordered some and picked them up on the way through. Nice folks and a great product.
 
My last order of Zero bullets came from Roze distributing in March of 2020, just about when the pandemic was starting up. They haven't had much in stock since then. I presume they are supplying commercial reloaders first.
 
I use those same bullets in my hunting loads. I like them better than jhps especially for penetration on deer and hogs. As noted Roze has been out of stock since the plandemic took over. I bought a bunch of the 240s in .44 and 158s in .357 before they sold em all. I have been rationing them and running the Hi Tek coated stuff lately at the range.
 
I still have 1 box of the Zero 240 gr JSP. I put them over 5.7 gr Win231 for easy loads in my S&W 69. Much fun to shoot, but, they come sized at .431. They may have been intended for a 44 mag rifle. I had to resize them to .429 for my revolver. Still, I think they are great bullets.
 
I always liked Zero bullets but knew you had to lean on them to get much expansion, good to see a recovered one
You are mistaken if you think that you have to run them fast to get good expansion.
The pictures below are of a Zero Brand 230gr JHP that had a muzzle velocity of about 770ft/sec.
The load was 4.6gr of Titegroup (4.8gr max.) shot out for a 5" 1911 at a dirt berm at a distance of 15M.
Notice that it didn't shed any weight at all.
I may have shot a few of these
45ACP1.JPG 45ACP2.JPG 45ACP3.JPG
FC433886-40F2-4ED0-8D33-FDC58B84DA26.jpeg
 
I use those same bullets in my hunting loads. I like them better than jhps especially for penetration on deer and hogs. As noted Roze has been out of stock since the plandemic took over. I bought a bunch of the 240s in .44 and 158s in .357 before they sold em all. I have been rationing them and running the Hi Tek coated stuff lately at the range.
I regret not getting more of the 158gr. I only bought 2k and I'm down to 1600 after loading 300 last week.
 
You are mistaken if you think that you have to run them fast to get good expansion.
The pictures below are of a Zero Brand 230gr JHP that had a muzzle velocity of about 770ft/sec.
The load was 4.6gr of Titegroup (4.8gr max.) shot out for a 5" 1911 at a dirt berm at a distance of 15M.
Notice that it didn't shed any weight at all.
I may have shot a few of these


I was referring to the 240 grain 44 bullets the original poster used. I know they are fairly heavy in the jacket.
 
Status
Not open for further replies.
Back
Top