Need some .357 mag bullets cheapest coated or FMJ

Have you checked out Roze for the Zero bullets?

http://www.rozedist.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=RZD&Category_Code=ZBJ-38S

1KPerDay said:

Nope, thanks. Do their prices include shipping? Ideally I'd like to get .10/ea or lower shipped if possible. Not sure it is possible.

Click to expand...

Yes, on orders of 1k bullets or more.

http://www.rozedist.com/mm5/merchant.mvc?Screen=SFNT&Store_Code=RZD

Really close to one side or the other of $.10, depending on weight and volume.

Looked at RMR? With the THR discount it's a great price on 1K of these: https://www.rmrbullets.com/shop/bullets/357-158-gr-plated-round-nose-flat-point-bullets-new/

ETA: Sorry, you asked for FMJ not plated...

Take a look at these: https://www.rmrbullets.com/shop/bul...otal-metal-jacket-tmj-bullets-with-cannelure/

I like Gallant Bullets. New shop, responsive customer service, and I've run a couple batches of their 158gr without issue.

I don't shop around anymore. It's either Missouri Bullet or RMR.

sellersm said:

Looked at RMR? With the THR discount it's a great price on 1K of these: https://www.rmrbullets.com/shop/bullets/357-158-gr-plated-round-nose-flat-point-bullets-new/

ETA: Sorry, you asked for FMJ not plated...

Take a look at these: https://www.rmrbullets.com/shop/bul...otal-metal-jacket-tmj-bullets-with-cannelure/

Click to expand...

I'm hoping Jake starts offering some 158 gr. JSP/JHP before my next order.

Nothing against Zero.

MBC, RMR, or Acme.

Rule3 said:

I don't shop around anymore. It's either Missouri Bullet or RMR.

Click to expand...

While I am happy with MBCs Action SWC, I like the option of an inexpensive jacketed bullet, especially with having a rifle in said cartridge now.

Edit: The OP was about coated too. My bad. Yes Missouri bullets (158 gr. ?)

http://missouribullet.com/details.php?prodId=416&category=20&secondary=16

$43/500 and up to 2000 shipped for $14.

Speer has a rebate 20% back on purchase price.
https://promotions.vistaoutdoor.com/EN/US/Promo/11/118/EntryForm


https://www.midsouthshooterssupply....ter-158-grain-jacketed-hollow-point-450-count

Shipping was reasonable for a large qty. around $0.10/ea considering rebate

I have shot a lot of Summers Enterprises. I normally buy the 130 flat point and shoot them in 38 Sp, 9mm, and 38 Super. The 500 count box is $31, the 900 count is $55.80. You can get any 4 boxes of his bullets shipped in a medium flat rate box shipped for $14 the last time I ordered.

https://summersenterprisesllc.com/product-category/hi-tek-38/

PM sent.

MBC has a 5% code too. I love MBC and shoot their 180, 158, and 148gn bullets extensively. They're good with no leading even in my heaviest loads of H110.

sequins said:

MBC has a 5% code too. I love MBC and shoot their 180, 158, and 148gn bullets extensively. They're good with no leading even in my heaviest loads of H110.

Click to expand...

In 357, I have used the 158 gr. SWC with 2400. Just received another order of them. I will eventually get some 180 gr. to try for a rifle.

I have used Missouri bullets in 9, 40, & 45, when good results.

Acme has a 10 % code too. IY6C IN cap I believe. Have been castijng about 3 yrs now, so I haven't bought any since my last batch of Sommers bullets, best prices around and he does hitek now.

For jacketed, Zero bullets are my go-to. In 357mag and 44mag, I can push them hard in my rifles, 1800+ fps, and accurate. I've seen evidence of plating failure in my revolvers, so I don't do plated for those calibers anymore.

For the OP. if you want plated that are as good as FMJ try the RMR. I bought some only to use at an indoor range. I over crimped the snot out of them and smashed them in a vice. To me there is little to no difference than say a Gold Dot. They also have a cannelure.

https://www.rmrbullets.com/shop/bullets/357-158-gr-plated-round-nose-flat-point-bullets-new/

Rule3 said:

For the OP. if you want plated that are as good as FMJ try the RMR. I bought some only to use at an indoor range. I over crimped the snot out of them and smashed them in a vice. To me there is little to no difference than say a Gold Dot. They also have a cannelure.

https://www.rmrbullets.com/shop/bullets/357-158-gr-plated-round-nose-flat-point-bullets-new/

Click to expand...

I believe Speer Gold Dots are plated.

I've been shooting Acme for about 3 years. Good bullets but I'm going back to jacketed. It's a better bullet and the price difference is only a few cents. With the rebates the price is very close. I buy a few thousand at a time anyway so every order is over $100.

Thanks for heads up Dagerv.

1KPerDay said:

RodII said:

Summers Enterprises ... 130 flat point ... 500 count box is $31, the 900 count is $55.80.

Click to expand...

Heck of a price! I'll remember that for next time.

Click to expand...

FYI, here's a listing of manufacturers/vendors of reloading components - https://www.thehighroad.org/index.p...ponents-on-sale.707473/page-167#post-10933821

drband said:

I believe Speer Gold Dots are plated.

Click to expand...

Super duper, secret plated bonded.