• You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.

Contender barrel

Status
Not open for further replies.

spiker44

Member
Joined
Sep 28, 2011
Messages
78
Location
Shickshinny PA
Hi,
Just picked up a contender barrel in 7mm TCU. It came along with a set of three barrels I got at an auction. Don't know to much about the cartridge and I will have to do some research on it for sure. My question I have is it has no sights on it. There are tapped holes at the front and rear of the barrel where it looks like a open sight set was mounted. I would like to get a set of fiber optic open sights for it. I would need a ramp and rear sight and a ramp and post for the front I take it? How do I find the right one to match the holes that are already there. Is that pretty much standard? Thanks
Mike
 
I haven't looked at a TC catalog in a while but that would be the first place I would look and then Brownell's. it also depends upon what you are going to use the 7 mm TCU for. to me to take full advantage of the round I would put a 2 x EER Leupold pistol scope on it. it is a very easy to shoot , accurate and flat shooting for a handgun round
 
Lots of 223 brass out there cheap, that 7 TCU really was cats meow, for knocking down steel targets, a friend of mine killed alot of Deer with it.14 inch barrel,i have 3 barrels my self, not in 7tcu,
I have 221, in 10 in. 223 in 21 in, and 30 Herrett, in 12 in,I love to get a 21 in.Barrel 6mm TCU,
 
Hi,
Just picked up a contender barrel in 7mm TCU. It came along with a set of three barrels I got at an auction. Don't know to much about the cartridge and I will have to do some research on it for sure. My question I have is it has no sights on it. There are tapped holes at the front and rear of the barrel where it looks like a open sight set was mounted. I would like to get a set of fiber optic open sights for it. I would need a ramp and rear sight and a ramp and post for the front I take it? How do I find the right one to match the holes that are already there. Is that pretty much standard? Thanks
Mike
I would call T/C; they've always helped me out with things like that.
 
E. A. Brown Company has a lot of Contender stuff. You might want to put a scope on it to take advantage of the accuracy of 7TCU. What other barrels did you get? Be careful, they are addictive.
 
Thanks guys! I took your advice and put a scope base on the 14" barrel. Brownells had them in stock. Now I am scope shopping and also looking for more barrels. Guess I am already hooked.
 
Status
Not open for further replies.
Back
Top