Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Hello, Got another revolver I'd like to know the date of mfg please.
a) .357 mag blued
b) 6 inch barrel pinned
c) square butt K frame
d) 6 shot recessesed cylinder
e) adjustable rear - partridge front
f) ser no. 57K50**
g) Model 19-4
I purchased the two pictured handguns from my uncle's estate in 2008.
As you can see the one on top is a 45ACP Model 1955. It is not stamped as a Model 25 so I'm fairly certain it's a Pre-25 and I think it was manufactured in 1957 (looking for confirmation or correction).
The second photo shows the serial number, which was washed out due to file size reduction but is S 166019.
The "K.22" is listed as a "22 Long Rifle CTG" which I believe predates the Model 17 (most similar model to this) however, I'm not sure that's truly analogous. I also don't know if it's pre WWII but I suspect it's around 1947. Serial number on that is K 19448
As stated I attached two photos one being with open cylinders you can see other numbers stamped on the frame. I'm not sure what they mean although I know they are not serial numbers; as those are stamped in 3 places on the .45 and two places on the 22. Cylinders both reflect the numbers I cited and the grip frames have them also. The .45 has a third place which is inside the barrel lug as you can see in the photo. Any other info anyone could provide would be most appreciated. I will add however the .22 has 3 small dimples on the cylinder which look like dimples on center fire primers but as this isn't a center fire weapon I have no idea what caused them.
PS both weapons are 5 screw models.
dct9000:
Serial number S15645x shipped November 1956.
Serial number S167001 shipped January 1957.
So your Model 1955 .45 Target Model (Heavy Barrel) was probably manufactured in 1956, but my have shipped in 1957.
Serial number K19448 indicated a K22 Masterpiece (Postwar 3rd Model) with a 1948 year of manufacture, and quite early in that year.
The standard catalogue of S&W notes that pre '48 frames were stamped made in the USA, from 1948 they were stamped with the 4 line address. This suggests yours was already going through production in late 1947.
Early production had a tapered top rib and a 1/10" wide front sight. Later guns had a 1/8" front sight and straight rib.
In 1957 the K22 Masterpiece was designated the Model 17.
Are the dimples on the cylinder face? they may be caused by firing pin strikes when dry firing.
The grips on the K22 are probably original and may be numbered to the gun on the inside.
The grips on the .45 are of recent production.
Thank you so much. Based on your info the M1955 is very close to the same age as me, as I was born on 11/19/1956. So I may predate it by a little but not by much. I really appreciate the information you gave me.
As for the grips they were on the .45 when my uncle bought it 20+ years ago.
Again I really appreciate the information you gave me.
Regards
Dave
hey gents.. I picked up a gem at gun show last week. would appreciate any info you can give me. It was in bad shape and grip safety and ejector wouldn't work. Bore was rusty. Cleaned and lubed and now all is functional. Even bought an old box of .38 s&w ammo for few bucks. its a break top s&w in 38 s&w, 4 inch barrel, round butt with grip safety, hammerless, 5 shot, tiny fixed sights. front sight filed off. serial 3824X , I'll try to include photo. thanks..
It's a Smith & Wesson Safety Hammerless/New Departure 2nd. Model. Date of manufacture is likely 1899. Numrich (www.gunpartscorporation.com) likely have a sight blade that can be made to fit.
It is sometimes called The President's revolver because both presidents Teddy and Franklin D. Roosevelt owned and sometimes carried one. It was named the Safety Hammerless because of the unique grip safety. And because it was made from 1887 to 1940 it became the longest lasting S&W top-break.
Because of it's age, condition and the fact it was made to withstand black powder only - I STRONGLY SUGGEST THAT YOU DON'T SHOOT IT! Consider it to be what it is, a very interesting relic with a lot of history behind it.
.38 Military & Police Postwar, the Pre-Model 10. Manufactured between 1948 & 1951, serial range for those years was C1 to C223998, starting in April 1948, so 1949 seems likely. Grips are modern after market. The gun appears to be refinished, S&W did not nickel plate the hammer and trigger. If the hammer and trigger are color case hardened, not nickel, then the finish may be original.
From the hammer it appears to be a modern 'short action' gun, the change over from the pre-war 'long action' to short action occurred 1947-1948 as old parts were used up.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.