Lee turret size help

[WestKentucky]

All of my reloading stuff is still packed away from moving, but I’m getting closer to unpacking. Part of my prep is that I want to better organize stuff, and I will be printing off some stuff on my 3D printer to help with that. Issue there is that sizing gets wonky between programs and downloaded files, so there can be huge size errors very easily. With the slicer I’m using now I can easily set final dimension and scale everything if I know a good X Y or Z dimension. If somebody could measure a lee turret (mine are all 4 hole) I could set my sizing and print the holders appropriate size and use those when I unpack. X and Y are diameter. Z is height, which I think is really the easiest number for this particular instance because of the way the holders were designed.

Thanks in advance.

 

[red rick]

3 1/16 “ in diameter and 1” tall .

 

[WestKentucky]

3 1/16 “ in diameter and 1” tall .

Thanks a ton. Looks like the file is off a bit as the hole size is a bit large when I set it by the height. I would rather have a container loose than tight for sure though. I will let it ride and see how it turns out.