rcmodel
Member in memoriam
After thought!
Here is a very useful homemade tool for fitting those blind hole hidden tangs in your Bling knife project!!![Big Grin :D :D](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
I made it years ago from some 3/16" cold rolled steel rod, and a 3/16" x 3/16" tool steel lathe bit ground sharp, and silver-soldered to the rod handle.
This thing allows you to snake back in those blind holes and cut out Epoxy that squeezes out inside the pre-fit tang hole, drilled antlers, Mud Dauber nests on old forgotten projects, etc.
You can make one for nothing, IF you have a half-way decent Junk box!!
And you will not get along without it sooner or later!!
Hole Scraper Tool:
Cutter detail: Photo Looks like I need to sharpen it before I use it next time!!![Eek! :eek: :eek:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
rc
Here is a very useful homemade tool for fitting those blind hole hidden tangs in your Bling knife project!!
I made it years ago from some 3/16" cold rolled steel rod, and a 3/16" x 3/16" tool steel lathe bit ground sharp, and silver-soldered to the rod handle.
This thing allows you to snake back in those blind holes and cut out Epoxy that squeezes out inside the pre-fit tang hole, drilled antlers, Mud Dauber nests on old forgotten projects, etc.
You can make one for nothing, IF you have a half-way decent Junk box!!
And you will not get along without it sooner or later!!
Hole Scraper Tool:
![A37 Scraper.jpg A37 Scraper.jpg](https://www.thehighroad.org/data/attachments/157/157707-429d534092d4b37605dfed7ae06f8969.jpg)
Cutter detail: Photo Looks like I need to sharpen it before I use it next time!!
![A38 Scraper.jpg A38 Scraper.jpg](https://www.thehighroad.org/data/attachments/157/157708-74d2bfcb4cb2aa8fd736224f17d1b27a.jpg)
rc
Last edited: