New Pietta Frontier Sheriff's .45Colt

CraigC

Sixgun Nut
Joined
Jan 27, 2006
Messages
23,863
Location
West Tennessee
New addition and a new stump. I bought one of the Springfield HiPowers a while back, shot two mags through it and decided it didn't do anything for me. So today I traded it for a Pietta Frontier .45Colt. These are really nice guns. The action is slick, the grips are wonderfully shaped and have a little grain in them. The pics don't do the case colors justice. Shoots good for windage, got plenty of front sight to zero it.

IMG_3067b.jpg


IMG_3074b.jpg


IMG_3076b.jpg
 
That's where a 45acp cylinder would shine!
But not for the Sport of Cowboy Mounted competition as I said only one kind of blank is handed out and required. And the short 3.5 or 4 5/8 barrels work best!

Cowboy Mounted Shooting Association® is the Fastest Growing Equestrian Sport in the Nation. Mounted contestants compete in this fast action timed event using two .45 caliber single action revolvers each loaded with five rounds of specially prepared blank ammunition. The Cowboy Mounted Shooting Association "C.M.S.A." has a variety of levels of competition for everyone, ranging from novice levels to the seasoned professional.

What type of guns are used?​

Mounted Shooters use .45 caliber single action revolvers like those used in the late 1800's. Single action revolvers must be cocked each time before firing by drawing the hammer back. A double action revolver can be fired by simply pulling the trigger, without cocking the hammer. Despite the use of double action revolvers in the Old West, the CMSA limits our competitions to single action revolvers. Only fixed sight single action revolvers of .45 Colt caliber, designed prior to 1898, or reproductions thereof, shall be allowed in CMSA competitions. Examples are: Colt Single Action Army or Bisley Model, Smith & Wesson Schofield, Russian, or Remington Models 1875 & 1890, their reproductions and Ruger Vaqueros, Bisleys or Montados.

What about gun leather?​

Riders can buy 'off-the-shelf replicas' of the old time gun belts and holsters. Or, you can have custom-made gun belts and holsters to suit your wishes. There are several custom 'makers' that you can find in 'old west' magazines.

Do you use live ammunition (lead bullets) or bird shot?​

No. The cartridges fired are called .45 caliber Long Colts. The brass cartridge is loaded with black powder (like that used in the 1800's). This load will break a balloon up to about 15 feet. Live rounds are strictly prohibited at competitions.
 
New addition and a new stump. I bought one of the Springfield HiPowers a while back, shot two mags through it and decided it didn't do anything for me. So today I traded it for a Pietta Frontier .45Colt. These are really nice guns. The action is slick, the grips are wonderfully shaped and have a little grain in them. The pics don't do the case colors justice. Shoots good for windage, got plenty of front sight to zero it.

IMG_3067b.jpg


IMG_3074b.jpg


IMG_3076b.jpg
That is a good looking revolver. Pietta has really improved their products. Sure like mine, which came with the .45 acp cylinder also.
You did good on that trade.
 
That is a good looking revolver. Pietta has really improved their products. Sure like mine, which came with the .45 acp cylinder also.
You did good on that trade.

Yep, just don't be tempted to fire +p's in it and you'll be OK. I had to "gain" headspace in my Pietta Frontier for the 45C cylinder after five 45acp +p's . . .
I did that as a "familiarity" exorcize before shooting them in the '60 Army 45acp. The Uberti '60 handles them just fine.

Mike
 
Yep, just don't be tempted to fire +p's in it and you'll be OK. I had to "gain" headspace in my Pietta Frontier for the 45C cylinder after five 45acp +p's . . .
I did that as a "familiarity" exorcize before shooting them in the '60 Army 45acp. The Uberti '60 handles them just fine.

Mike
Agreed. Mid range loads for both; no hot rodding here.:thumbup:
 
This was actually a new shop in town. They're trying to specialize in "old west" gear. After talking to them about it before, I took several holsters and sheaths to show them to see if they might want to put some on their shelves. This one was test fitted with the Pietta before I even asked about trading for it. He wanted the holster, I got the sixgun instead. :D

057b.jpg
 
Craig,

Outstanding photography as always. Just beautiful!

Being a traditionalist and a history buff this is my version of a Sheriff's Model, originally called "ejectorless models" by Colt. It has buffalo horn stocks and is naturally chambered in 45 Colt. Oh, and it was made by USFA when they were still in business.
DSC00134.JPG

I am trying to get the modern electroless nickel to look like old nickel plating by rubbing it down with lead removal cloth. It is still a work in progress.

Dave
 
Back
Top