Well it out shoots me as I'm just starting to get into high power stuff. It will put 5 shots in just over an inch at 100 yards which normally I wouldn't brag about but almost always three of them are touching and within 1/2in. I can tell you I'm not the worlds best shot by any means but when I get those groups with full length sized military brass, bulk Winchester 150grn fmjbt bullets and a $100 BSA scope I belive the potential for pretty good accuracy it there. I know for a fact the barrel is free floated, and compared to my mid 70's rem 700 the trigger has been worked on. So that's where my assumption about the stock comes from. BUT my big problem is every shot the rifle puts a bright wavy line about mid way up the case. So I'm thinking it has headspacing issues.
I have never fired neck sized brass in this rifle because I don't have a neck sizer. But it has split 2 cases at the same spot in the same wavy fashion as mentioned above, that had god only knows how many reloads on them(got them from a friend) and had been shot in an HK style fluted chamber.
Basically I'm wondering where to go with this rifle, because I think it could be a very accurate rifle. Just the head spacing issue, and the fact that the stock has a crack in it around the front sling swivel from where someone tightened a bipod down to tight, makes me wonder if I shouldnt just start over getting a new HS precision or mc millian stock, Krieger barrel, etc etc and build a 1000+ yard rifle? Because every time I take this rifle to the range I keep trying to do better and I think I could really enjoy long range shooting.