Thank You THR - Pay it Forward

Status
Not open for further replies.
Time to repay some debt here, and lighten a load for moving. I'm offering up a small flat rate box of 9mm goodies. Some brass, but mainly cast 9mm bullets. I will post the data on them tomorrow because I can't remember exactly what they are, or even who the manufacturer is on the bullets. Will do the same for another box in Blarby's thread. Let's go 2 weeks on those, give folks a chance to get their names in...so 16th?

Info...Vance Mfg Co 9mm Rn 122g.
 
Last edited:
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

Dudedog, Done!

Also removing OldMac's posted items.

WestKentucky, Done and thanks!

BoltLover, Done and thanks!

Update:

javelinablanco: Nosler reloading manual (#2) - End date 4/9/16

sigsmoker: #5 shell holder A for Lee shell trimming set - End date 4/9/16

sigsmoker: #5 shell holder B for Lee shell trimming set - End date 4/9/16

Scooter22: 30 once fired 8x56R Austrian/Hungarian cases. Berdan brass 1938 *azi eagle cases - End date 4/9/16
- WestKentucky - PIF contributor

sigsmoker: HERTERS No 2 Shellholder (works with .32 Winchester Special) - End date 4/9/16

WestKentucky: SFRB Vance Mfg Co lead 9mm RN 122 gr and brass - End date 4/16/16
- BoltLover - PIF contributor

BoltLover: Lee zip trim with Universal collet shell holder - End date 4/16/16
 
bds ... Lets just delete the unwanted shellholders ( all 3 ) and replace this with a bag of about 262 tumbled 9 mm brass.
Thank you!
 
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

sigsmoker, Done and thanks!

Update:

javelinablanco: Nosler reloading manual (#2) - End date 4/9/16

Scooter22: 30 once fired 8x56R Austrian/Hungarian cases. Berdan brass 1938 *azi eagle cases - End date 4/9/16
- WestKentucky - PIF contributor

WestKentucky: SFRB Vance Mfg Co lead 9mm RN 122 gr and brass - End date 4/16/16
- BoltLover - PIF contributor

BoltLover: Lee zip trim with Universal collet shell holder - End date 4/16/16

sigsmoker: 262 tumbled 9mm brass - End date 4/16/16
 
sigsmoker said:
bds ... Lets just delete the unwanted shellholders ( all 3 ) and replace this with a bag of about 262 tumbled 9 mm brass.
Thank you!
Click to expand...

The problem with the LEE shell holders for the trimmers is you get a new one with each length gauge and a lot of them are the same as ones you already own so you end up with a ton of the same ones, I am not sure without looking it up but think the #5 you were trying to give away is for the 30-06 size case head.

Some people decided to buy the universal case holder like I did and so every one of the threaded shell holders that comes with a length gauge are not even needed at all, I have something like 5 or 6 or so of the 06 head size ones since I got case length gauges for 30-06, 22-250, 270, 7mm-08, 7mm mauser, and probably others I can not think of real quick.




Michael Grace
 
Opps take off the Mak bullets only.
Please add these back.
50 RMR 124gr 9mm FN/25 RMR 9mm 147gr "Target" HPs/25 RMR 9mm 124 "Target" Hps + possible surprise depending on if I have something else the winner might want to try.
Please make the date the 4/15 or 4/16 whenever you are drawaing.
 
Last edited:
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

Dudedog, Done and thanks!

Update:

javelinablanco: Nosler reloading manual (#2) - End date 4/9/16

Scooter22: 30 once fired 8x56R Austrian/Hungarian cases. Berdan brass 1938 *azi eagle cases - End date 4/9/16
- WestKentucky - PIF contributor

WestKentucky: SFRB Vance Mfg Co lead 9mm RN 122 gr and brass - End date 4/16/16
- BoltLover - PIF contributor

BoltLover: Lee zip trim with Universal collet shell holder - End date 4/16/16

sigsmoker: 262 tumbled 9mm brass - End date 4/16/16

Dudedog: 50 RMR 124gr 9mm FN/25 RMR 9mm 147gr "Target" HPs/25 RMR 9mm 124 "Target" HPs + possible surprise depending on if I have something else the winner might want to try - End date 4/16
 
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

rcmodel, Done!

Update:

javelinablanco: Nosler reloading manual (#2) - End date 4/9/16
- rcmodel - Contributing member

Scooter22: 30 once fired 8x56R Austrian/Hungarian cases. Berdan brass 1938 *azi eagle cases - End date 4/9/16
- WestKentucky - PIF contributor

WestKentucky: SFRB Vance Mfg Co lead 9mm RN 122 gr and brass - End date 4/16/16
- BoltLover - PIF contributor

BoltLover: Lee zip trim with Universal collet shell holder - End date 4/16/16

sigsmoker: 262 tumbled 9mm brass - End date 4/16/16

Dudedog: 50 RMR 124gr 9mm FN/25 RMR 9mm 147gr "Target" HPs/25 RMR 9mm 124 "Target" HPs + possible surprise depending on if I have something else the winner might want to try - End date 4/16
 
bds ... since there are no takers yet ... Please remove the 9mm cases, I want to give them to my Brother-in-law to reload as he just got a SR9c.
In it's place put in these 40 count gas checked cast 275 gr semi wadcutters. I believe these are powder coated but lube wouldn't hurt any.
They have a diameter measuring over the lube grooves of .4335
(oversized 44 cal bullets) Might work great in a lever action 44 magnum rifle.
Last change bds ... I promise, sorry but it's all I have to put up now and these are a better find than 9 mm brass anyway.

attachment.php
 
bds, please add an SFRB filled with 45acp brass for the 4/16 drawing.

Thanks
Vaalpens
 
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

WestKentucky, Done!

vaalpens, Thanks!

Congratulations rcmodel! PM javelinablanco for Nosler reloading manual (#2)

Congratulations WestKentucky! PM Scooter22 for 30 once fired 8x56R Austrian/Hungarian cases. Berdan brass 1938 *azi eagle cases

Thanks to those who posted items!

Update:

WestKentucky: SFRB Vance Mfg Co lead 9mm RN 122 gr and brass - End date 4/16/16
- BoltLover - PIF contributor

BoltLover: Lee zip trim with Universal collet shell holder - End date 4/16/16
- WestKentucky - PIF contributor

sigsmoker: 40 count gas checked cast 275 gr semi wadcutters (.4335") - End date 4/16/16

Dudedog: 50 RMR 124gr 9mm FN/25 RMR 9mm 147gr "Target" HPs/25 RMR 9mm 124 "Target" HPs + possible surprise depending on if I have something else the winner might want to try - End date 4/16

vaalpens: SFRB 45acp brass - End date 4/16/16
 
Guys, I'm going to go ahead and end my posted 9mm stuff. I'm packing up the reloading stuff very soon and don't want to risk mixing that up with other stuff. I will be building a new bench at my next home, wherever that may be, but it's likely not going to be in Western Kentucky...so Congrats Boltlover. I will get them in the mail ASAP.
 
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

Congratulations BoltLover! WestKentucky, good luck on your move and thank you.

Scooter22, Done!

Update:

BoltLover: Lee zip trim with Universal collet shell holder - End date 4/16/16
- WestKentucky - PIF contributor

sigsmoker: 40 count gas checked cast 275 gr semi wadcutters (.4335") - End date 4/16/16
- Scooter22 - PIF contributor

Dudedog: 50 RMR 124gr 9mm FN/25 RMR 9mm 147gr "Target" HPs/25 RMR 9mm 124 "Target" HPs + possible surprise depending on if I have something else the winner might want to try - End date 4/16

vaalpens: SFRB 45acp brass - End date 4/16/16
 
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

LoneGoose, Done!

Update:

BoltLover: Lee zip trim with Universal collet shell holder - End date 4/16/16
- WestKentucky - PIF contributor

sigsmoker: 40 count gas checked cast 275 gr semi wadcutters (.4335") - End date 4/16/16
- Scooter22 - PIF contributor

Dudedog: 50 RMR 124gr 9mm FN/25 RMR 9mm 147gr "Target" HPs/25 RMR 9mm 124 "Target" HPs + possible surprise depending on if I have something else the winner might want to try - End date 4/16

vaalpens: SFRB 45acp brass - End date 4/16/16
- LoneGoose - PIF contributor
 
Scooter22, I got a wonderful time capsule in the mail today. Seems impossible that this stuff is still so pristine after being who knows where since 1938. Thank you so much.
 
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

Congratulations WestKentucky! PM BoltLover for Lee zip trim with Universal collet shell holder

Congratulations Scooter22! PM sigsmoker for 40 count gas checked cast 275 gr semi wadcutters (.4335")

Congratulations LoneGoose! PM vaalpens for SFRB of 45acp brass

Unclaimed items reset for Saturday, 4/23/16.

Thanks to all those who posted items!

Update:

Dudedog: 50 RMR 124gr 9mm FN/25 RMR 9mm 147gr "Target" HPs/25 RMR 9mm 124 "Target" HPs + possible surprise depending on if I have something else the winner might want to try - End date 4/23/16
 
Scooter22 - your 40 count gas checked cast 275 gr semi wadcutters shipped today priority and PM sent.
 
Status
Not open for further replies.

Similar threads

M
  • Locked
MBC Discount Code Update
Replies
7
Views
2K
MissouriBullet
M
primalmu
  • Locked
Pay It Forward Idea
Replies
13
Views
890
NeuseRvrRat
NeuseRvrRat
longdayjake
  • Locked
5% off coupon only for THR members at Rocky Mountain Reloading
2
Replies
40
Views
21K
bbqreloader
bbqreloader
M
  • Locked
The Linotype is available
Replies
8
Views
927
Maj Dad
Maj Dad
Prowler53
  • Locked
Thank you THR
Replies
1
Views
208
forty_caliber
forty_caliber
Back
Top