Thank You THR - Pay it Forward
- Thread starter LiveLife
- Start date
-
- Tags
- coupon code
- Status
clearcut
Member
Boltlover ,the bullets arrived today,thank you for the generous extra bullets!!!
THANK YOU!! CC
THANK YOU!! CC
BoltLover
Member
Your welcome CC
BoltLover
Member
Thanks Sig
Dudedog
Contributing Member
sigsmoker,
glad Boltlover was interested in the sabots.
I was about ready to go buy a .50 cal muzzle loader so I could take them off your hands so you wouldn't feel bad that nobody wanted them.
Thanks for saving me the money Boltlover!
glad Boltlover was interested in the sabots.
I was about ready to go buy a .50 cal muzzle loader so I could take them off your hands so you wouldn't feel bad that nobody wanted them.
Thanks for saving me the money Boltlover!
Artofgolf
Member
Congratulations Dudedog! PM Artofgolf for Power Bond 380 Auto 100 gr plated RNFP
PM received, Dudedog - will mail tomorrow ETA 8/14
PM received, Dudedog - will mail tomorrow
ETA 8/14sigsmoker,
glad Boltlover was interested in the sabots.
I was about ready to go buy a .50 cal muzzle loader so I could take them off your hands so you wouldn't feel bad that nobody wanted them.
Thanks for saving me the money Boltlover!
If they had been for a 58 cal I would have been all over them to try, I just use round balls w/patch and conical type bullets so far.
Michael Grace
el indio
Member
crowcifier666, it's been almost three months since I won the 38 brass. How much longer do I have to wait?
Crowcifier666
Member
el indo, I just looked through the moving boxes, and can't find any of the 38s. I apologize it must have gotten lost in the recent move.
49willys
Member
Seems as though no one needs any 35 cal.bullets.so lets remove them from the list and I will put up something else this weekend when I have more time to look for something.
OldMac
Member
I would like to have a shot at the mauser brass and have several small things that I have no use for and hate to throw away. I will ship together or separately.
1. Makarov grip - back bakelite with checkering, new
2. Makarov grip - black rubber with right handed thumb rest, new
3. Five (5) rounds Winchester nickle plated brass 300WSM. Right now they are live rounds but i will pull the bullets, dump the powder, and then ship the primed brass unless you are in knoxville, then you can have the loaded new ammo as is.
4. Four (4) Federal 38 Super +P brass shells, fired.
1. Makarov grip - back bakelite with checkering, new
2. Makarov grip - black rubber with right handed thumb rest, new
3. Five (5) rounds Winchester nickle plated brass 300WSM. Right now they are live rounds but i will pull the bullets, dump the powder, and then ship the primed brass unless you are in knoxville, then you can have the loaded new ammo as is.
4. Four (4) Federal 38 Super +P brass shells, fired.
Bullseye
Member
- Joined
- Jan 2, 2008
- Messages
- 1,598
I would imagine they are for a big .358 Winchester. Many times I caught myself thinking I need bullets for my 35 Rem but then saw the grain weight. Thanks for listing them though.
I had a model 71 years ago and the factory ammo was like $50.00 for 20 cartridges. That was quite generous of you to put them up.
Dudedog
Contributing Member
Got them Artofgolf,
Thanks!
Thanks!
Dudedog
Contributing Member
BDS,
Due do to a honest mistake on RMRs part on one of my orders, I ended up with 500 FREE 62gr .223 FMJs
(nice looking bullets)
Lets make 2 lots of 60 for others to try. (i haven't had a chance yet)
So
60 62gr new .223 FMJ
and
60 62gr new .223 FMJ
End date 8/29 or 8/30 (which ever day the drawing is)
(might throw in a little surprise with each lot as well)
http://www.shop.rmrbullets.com/224-556-62-Gr-Newly-Mfg-Lead-Core-FMJ-500-Ct-224-62-FMJ-NEW-500.htm
Jake and RMR should get part credit for this PIF since I got the bullets free. Big thanks to RMR - Joe and Jake.
Due do to a honest mistake on RMRs part on one of my orders, I ended up with 500 FREE 62gr .223 FMJs
(nice looking bullets)
Lets make 2 lots of 60 for others to try. (i haven't had a chance yet)
So
60 62gr new .223 FMJ
and
60 62gr new .223 FMJ
End date 8/29 or 8/30 (which ever day the drawing is)
(might throw in a little surprise with each lot as well)
http://www.shop.rmrbullets.com/224-556-62-Gr-Newly-Mfg-Lead-Core-FMJ-500-Ct-224-62-FMJ-NEW-500.htm
Jake and RMR should get part credit for this PIF since I got the bullets free. Big thanks to RMR - Joe and Jake.
Artofgolf
Member
OP
OP
LiveLife
Member
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------
OldMac/TheGerman/Dudedog/Artofgolf, Thanks!
49willys, done and thanks!
Update:
el indio: 80 7.63 Mauser cases (can use for 7.62x25 Tokarev pistol) - End date 8/15/15
- OldMac - PIF contributor
Dudedog: 20 Extreme 55 gr FMJ/20 Hornady "Match" 52gr BTHP #2249/30 Federal Fusion 62 gr pulled (from RMR) and some .223 range brass - End date 8/21/15
- sigsmoker - Contributing member
OldMac (all or separate) - End date 8/21/15:
- Makarov grip - black bakelite with checkering, new
- Makarov grip - black rubber with right handed thumb rest, new
- Five (5) Winchester nickle plated brass 300WSM (If in Knoxville, can have them as live rounds)
- Four (4) Federal 38 Super +P brass, fired
TheGerman: 3D printed Rock Chucker IV primer catcher - End date 8/21/15
Dudedog: 60 RMR 62 gr new .223 FMJ + surprise? - End date 8/29/15
Dudedog: 60 RMR 62 gr new .223 FMJ + surprise? - End date 8/29/15
Artofgolf: 25 38 cal Hornady XTP's - End date 8/29/15
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------
OldMac/TheGerman/Dudedog/Artofgolf, Thanks!
49willys, done and thanks!
Update:
el indio: 80 7.63 Mauser cases (can use for 7.62x25 Tokarev pistol) - End date 8/15/15
- OldMac - PIF contributor
Dudedog: 20 Extreme 55 gr FMJ/20 Hornady "Match" 52gr BTHP #2249/30 Federal Fusion 62 gr pulled (from RMR) and some .223 range brass - End date 8/21/15
- sigsmoker - Contributing member
OldMac (all or separate) - End date 8/21/15:
- Makarov grip - black bakelite with checkering, new
- Makarov grip - black rubber with right handed thumb rest, new
- Five (5) Winchester nickle plated brass 300WSM (If in Knoxville, can have them as live rounds)
- Four (4) Federal 38 Super +P brass, fired
TheGerman: 3D printed Rock Chucker IV primer catcher - End date 8/21/15
Dudedog: 60 RMR 62 gr new .223 FMJ + surprise? - End date 8/29/15
Dudedog: 60 RMR 62 gr new .223 FMJ + surprise? - End date 8/29/15
Artofgolf: 25 38 cal Hornady XTP's - End date 8/29/15
el indio
Member
bds, would you put me in for ArtofGolf's 38 XTP's. Thanks
javelinablanco
Member
bds, would you put me in for one of Dudedog's RMR 223s. Thanks!
OP
OP
LiveLife
Member
To participate in this PIF thread, do the following (random winners will be picked on Saturdays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------
el indio/javelinablanco Done!
Update:
el indio: 80 7.63 Mauser cases (can use for 7.62x25 Tokarev pistol) - End date 8/15/15
- OldMac - PIF contributor
Dudedog: 20 Extreme 55 gr FMJ/20 Hornady "Match" 52gr BTHP #2249/30 Federal Fusion 62 gr pulled (from RMR) and some .223 range brass - End date 8/21/15
- sigsmoker - Contributing member
OldMac (all or separate) - End date 8/21/15:
- Makarov grip - black bakelite with checkering, new
- Makarov grip - black rubber with right handed thumb rest, new
- Five (5) Winchester nickle plated brass 300WSM (If in Knoxville, can have them as live rounds)
- Four (4) Federal 38 Super +P brass, fired
TheGerman: 3D printed Rock Chucker IV primer catcher - End date 8/21/15
Dudedog: 60 RMR 62 gr new .223 FMJ + surprise? - End date 8/29/15
- javelinablanco - PIF contributor
Dudedog: 60 RMR 62 gr new .223 FMJ + surprise? - End date 8/29/15
Artofgolf: 25 38 cal Hornady XTP's - End date 8/29/15
- el indio - Contributing member
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------
el indio/javelinablanco Done!
Update:
el indio: 80 7.63 Mauser cases (can use for 7.62x25 Tokarev pistol) - End date 8/15/15
- OldMac - PIF contributor
Dudedog: 20 Extreme 55 gr FMJ/20 Hornady "Match" 52gr BTHP #2249/30 Federal Fusion 62 gr pulled (from RMR) and some .223 range brass - End date 8/21/15
- sigsmoker - Contributing member
OldMac (all or separate) - End date 8/21/15:
- Makarov grip - black bakelite with checkering, new
- Makarov grip - black rubber with right handed thumb rest, new
- Five (5) Winchester nickle plated brass 300WSM (If in Knoxville, can have them as live rounds)
- Four (4) Federal 38 Super +P brass, fired
TheGerman: 3D printed Rock Chucker IV primer catcher - End date 8/21/15
Dudedog: 60 RMR 62 gr new .223 FMJ + surprise? - End date 8/29/15
- javelinablanco - PIF contributor
Dudedog: 60 RMR 62 gr new .223 FMJ + surprise? - End date 8/29/15
Artofgolf: 25 38 cal Hornady XTP's - End date 8/29/15
- el indio - Contributing member
03fatboy
Member
bds,would you put me in for Dudedogs 62grain .223 RMR
Thanks
Thanks
bds, add these for someone to try out. make the date for the 22nd.
I am offering up 35, 12ga 1 oz LEE drive key slugs. You can see what they look like here.
http://leeprecision.com/1-oz-slug-mold.html
The instructions for loading these are at the same link, make sure you use the info for the 1 oz and not the 7/8 oz on that instruction sheet.
In the small experience I have with these you will need to make sure you use the wad that is listed or else the will be a very tight fit in the shell.
Michael Grace
I am offering up 35, 12ga 1 oz LEE drive key slugs. You can see what they look like here.
http://leeprecision.com/1-oz-slug-mold.html
The instructions for loading these are at the same link, make sure you use the info for the 1 oz and not the 7/8 oz on that instruction sheet.
In the small experience I have with these you will need to make sure you use the wad that is listed or else the will be a very tight fit in the shell.
Michael Grace
OP
OP
LiveLife
Member
Duplicate
Last edited:
- Status
Similar threads
- Locked
